Abstract:This paper provides a legged stable walking control strategy based on multi-sensor information feedback about BIT-NAZA-II, a large load parallel hexapod wheel-legged robot developing for the problem of vertical contact impact and horizontal sliding of heavy leg robot in complex terrain environments. The BIT-NAZA-II robot has six legs and six wheels, and the wheels are installed on the foot-end. The wheels of each foot-end for the legs of the robot are locked when walking with legs. In order to realize the smooth transition between swing phase and stance phase, the leg motion is divided into different stages for control by state machine switching controller based on event (SMSCE). In the Z-direction, in order to avoid the shaking of the body caused by the contact impact at the moment of contact between the foot-end and the ground during the walking of the robot, an active compliance controller (ACC) based on impedance control (IC) is applied to solve the problem of contact impact. Moreover, in the X-direction, the swing leg retraction (SLR) based on Bezier curve (BC) is introduced to generate the foot-end trajectory of the robot, which solves the slip problem of the heavy leg robot and improves the horizontal stability. Finally, the control strategy of stable walking is respectively verified by the simulations and experiments. The results show that the ACC based on IC can effectively reduce the contact impact between the foot-end and the ground in the Z-direction and improve the stability of body. Besides, the anti-sliding ability is realized after introducing SLR based on BC in the X-direction, and we also verify that stable walking control strategy is effective, which provides a reference value for the stable walking of heavy leg robot in complex terrain.

A Control Strategy for SLIP-based Locomotion under Lateral Impact in 3D Space

3D-SLIP model based dynamic stability strategy for legged robots with impact disturbance rejection

Stable and Fast Planar Jumping Control Design for a Compliant One-Legged Robot

Sprinting Motion Planning for Planar Bipedal Robots Based on Driving Coordination between the Knee and Ankle Joints

Stability and Agility: Biped Running over Varied and Unknown Terrain

Tip over Avoidance Control for Biped Robot

Stable walking control and strategy of under-actuated biped robot

Vertical hopping control of hydraulically actuated single-legged robot based on SLIP

Hopping Motion on Heavy-Legged Bipedal Robot Based on SLIP Model and Whole Body Control

Dynamic Hopping Height Control of Single-Legged Hopping Robot

Running Gait and Control of Quadruped Robot Based on SLIP Model

High Dynamic Position Control for a Typical Hydraulic Quadruped Robot Leg Based on Virtual Decomposition Control

A spring-loaded inverted pendulum model for analysis of human-structure interaction on vibrating surfaces

Walking Control of Biped Robots on Uneven Terrains Based on SLIP Model

CPG-Based Control Scheme for Quadruped Robot to Withstand the Lateral Impact

Optimizing and designing a leg shape to increase robustness of a running robot on rough terrain

Bipedal Hopping: Reduced-order Model Embedding via Optimization-based Control

Control Strategy of Stable Walking for a Hexapod Wheel-Legged Robot.

Biped Walking Based on Stiffness Optimization and Hierarchical Quadratic Programming

Exponentially stabilizing an one-legged hopping robot with non-SLIP model in flight phase

Angular Momentum about the Contact Point for Control of Bipedal Locomotion: Validation in a LIP-based Controller