Abstract:The US Federal Communications Commission (FCC) has mandated wireless network operators and mobile devices to provide accurate location information for E‐911. Requirements for time of arrival (TOA) and time difference of arrival (TDOA) measurements have been specified in 3GPP LTE Rel. 9 to ensure accurate user equipment (UE) positioning even under bad conditions (e.g. with channel quickly varying and SNR being as low as −13 dB). To fulfil these requirements, it is vital to accurately estimate the first signal arriving path. In this work, we first derive ‐ without any approximation ‐ the Cramér–Rao lower bound (CRLB) of the LTE TOA and TDOA measurements based on the different pilots, which is shown to be as low as a few metres for SNR = −13 dB. The achievable performance of the LTE system is compared with the FCC and 3GPP requirements, and the impact of mobile multipath channels on the measurements is analysed. Then, we describe practical low‐complexity methods for LTE TOA and TDOA measurements with enhanced first arriving path detection. The maximum likelihood based correlation profile is used as detection metric. After grossly determining the signal region by a moving window, three methods, namely, peak detection, SNR‐based threshold and adaptive threshold based on noise floor and metric peak value are employed to estimate the first arriving path. Simulation results show that the proposed adaptive threshold‐based method can meet all 3GPP requirements under various realistic mobile channels, and can in some cases achieve a performance close to the CRLB. Copyright © 2014 John Wiley & Sons, Ltd.

A Geometry-Based Path Loss Model for High-Speed-train Environments in LTE-A Networks

Empirical Geometry-Based Random-Cluster Model for High-Speed-Train Channels in UMTS Networks

Maximum Likelihood Toa and Otdoa Estimation with First Arriving Path Detection for 3gpp Lte System

Geometry-based Stochastic Channel Model for High Speed Railway Communications

Non-Stationarity Characterization and Geometry-Cluster-Based Stochastic Model for High-Speed Train Radio Channels

Channel measurements and models for high-speed train wireless communication systems in tunnel scenarios: a survey

A Geometry-Based Stochastic Channel Model for the Millimeter-Wave Band in a 3GPP High-Speed Train Scenario

A First Look at Disconnection-Centric TCP Performance on High-Speed Railways

An Active-Passive Measurement Study of TCP Performance over LTE on High-speed Rails

Geometry-Based Channel Modeling for Tunnel Entrance Scenarios of Mountain Railway

An Empirical Analysis of the Radio Propagation Characteristics in High-Speed Railway Environment

An Empirical Air-to-Ground Channel Model Based on Passive Measurements in LTE

Path Loss Model for 3.5 GHz and 5.6 GHz Bands in Cascaded Tunnel Environments

Measurement-Based Delay and Doppler Characterizations for High-Speed Railway Hilly Scenario

Fading Characteristics of Wireless Channel on High-Speed Railway in Hilly Terrain Scenario

Characteristics of Travelling Wave Propagation in Catenary of High-speed Railway

Channel Measurement, Simulation, and Analysis for High-Speed Railway Communications in 5G Millimeter-Wave Band

Dynamic Channel Model With Overhead Line Poles for High-Speed Railway Communications

Satellite-Terrestrial Channel Characterization in High-Speed Railway Environment at 22.6 GHz

A 3D Non-stationary MmWave Channel Model for Vacuum Tube Ultra-High-Speed Train Channels

Empirical Study on Directional Millimeter-Wave Propagation in Railway Communications Between Train and Trackside