Abstract:Presented here is a reactively loaded microstrip transmission line that exhibit an ultra-wide bandgap. The reactive loading is periodically distributed along the transmission line, which is electromagnetically coupled. The reactive load consists of a circular shaped patch which is converted to a metamaterial structure by embedded on it two concentric slit-rings. The patch is connected to the ground plane with a via-hole. The resulting structure exhibits electromagnetic bandgap (EBG) properties. The size and gap between the slit-rings dictate the magnitude of the reactive loading. The structure was first theoretically modelled to gain insight of the characterizing parameters. The equivalent circuit was verified using a full-wave 3D electromagnetic (EM) solver. The measured results show the proposed EBG structure has a highly sharp 3-dB skirt and a very wide bandgap, which is substantially larger than any EBG structure reported to date. The bandgap rejection of the single EBG unit-cell is better than - 30 dB, and the five element EBG unit-cell is better than - 90 dB. The innovation can be used in various applications such as biomedical applications that are requiring sharp roll-off rates and high stopband rejection thus enabling efficient use of the EM spectrum. This can reduce guard band and thereby increase the channel capacity of wireless systems.

A Compact and Customizable Operation Frequency Filter for Broadband Applications

A Compact Customizable Tunable EBG Filter

A Compact Configurable Dual-Band Bandpass Filter

Compact CEBG Filter for High-Frequency Applications With Low Insertion Loss

A Compact Configurable EBG Filter on PCB

A wideband EBG structure with 1D compact microstrip resonant cell

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Compact Coplanar Waveguide Low-Pass Filter Using a Novel Electromagnetic Bandgap Structure

Design of a Compact and Low-Loss E-Band Filter Based on Multilayer Groove Gap Waveguide

Miniaturized 28-Ghz Packaged Bandpass Filter with High Selectivity and Wide Stopband Using Multilayer PCB Technology

Compact 12–18-GHz Bandpass Filter with Wide Stopband Using Hybrid Dual-Mode SIDGS/Microstrip Resonant Cell

Compact Wideband Ltcc Bandstop Filter Using Vertical Coupled-Line Units

Compact Box-Section Bandpass Filter with Improved Frequency Selectivity

A Compact and Low-Loss Tunable Bandpass Filter Using YIG/GGG Film Structures

Improved Design Of A Compact Ultra-Wideband Microwave Bandpass Filter Using A Ebg Structure

Compact Bandpass Filter with Mixed Electric and Magnetic (em) Coupling

A Compact 1.8–3.0 GHz IPD-Based Wideband Bandpass Filter for System-on-Package

Metamaterial inspired electromagnetic bandgap filter for ultra-wide stopband screening devices of electromagnetic interference

Compact Bandpass Filter with Wide Stopband and Low Radiation Using Fully-Packaged Substrate Integrated Defected Ground Structure

A Compact Half-Mode Substrate Integrated Waveguide Bandpass Filter with Wide Out-of-Band Rejection

Slot resonator-based electromagnetic bandgap coplanar waveguide and its filter application