Abstract:Floating-point fast Fourier transform (FFT) has been widely expected in scientific computing and high-resolution imaging applications due to the wide dynamic range and high processing precision. However, it suffers high area and energy overhead problems in comparison to fixed-point implementations. To address these issues, this paper presents an area- and energy-efficient hybrid architecture for floating-point FFT computations. It minimizes the required arithmetic units and reduces the memory usage significantly by combining three different parts. The serial radix-4 butterfly (SR4BF) is used in the single-path delay commutator (SDC) part to minimize the required arithmetic units with 100% adder utilization ratio obtained. A modified single-path delay feedback (MSDF) architecture is proposed to achieve a tradeoff between arithmetic resources and memory usage by using the new half radix-4 butterfly (HR4BF) with 50% adder utilization ratio obtained. The intermediate caching buffer is modified accordingly in the MSDF part. By combining both the advantages on arithmetic units reducing and memory usage optimization in different parts, the optimized area and power are obtained without throughput loss. The logic synthesis results in a 65 nm CMOS technology show that the energy per FFT is about 331.5 nJ for 1024-point FFT computations at 400 MHz. The total hardware overhead is equivalent to 460k NAND2 gates.

Delay-Optimized floating point fused add-subtract Unit

A Low Latency High Throughput Multiply-accumulator Unit for Float Point and Integer

An Effective Implementation of Dual Path Fused Floating-Point Add-Subtract Unit for Reconfigurable Architectures

Design of A Double-Precision Floating- Point Multiply-Add-Fused Unit with Consideration of Data Dependence

Design of A Fully Pipelined Single-Precision Multiply-Add-Fused Unit

Design of an Extended Floating-Point Multiply-Add-Fused Unit for Exploiting Instruction-Level Parallelism

A Low-Cost Floating-Point FMA Unit Supporting Package Operations for HPC-AI Applications

An Area- and Energy-Efficient Hybrid Architecture for Floating-Point FFT Computations.

Optimized Design of a Double-Precision Floating-Point Multiply-Add-dused Unit for Data Dependence.

A Fused Continuous Floating-Point Mac On Fpga

Design Of High Performance IEEE- 754 Single Precision (32 bit) Floating Point Adder Using VHDL

A Reconfigurable Floating-Point Fft Architecture

FFT implementation with multi-operand floating point units

Multiply-add fused float point unit with on-fly denormalized number processing

A Floating-point Coprocessor Configured by a FPGA in a Digital Platform Based on Fixed-point DSP for Power Electronics

A Hybrid SDC/SDF Architecture for Area and Power Minimization of Floating-Point FFT Computations

FHAM: FPGA-based High-Efficiency Approximate Multipliers Via LUT Encoding

Design of Floating-point Vector Coprocessor Based on FPGA

Architecture for Dual-Mode Quadruple Precision Floating Point Adder

Direct Alignment Algorithm for High-Speed Floating-Point Adder Design.

CuFP: An HLS Library for Customized Floating-Point Operators