Abstract:In recent years, due to the increase in the incidence of traffic accidents, the number of people with limb injuries has also increased. At the same time, among the aging population, neurological diseases or cardiovascular and cerebrovascular diseases have caused many people to have limb hemiplegia. It has been clinically proven that the use of rehabilitation equipment can help patients with limb injuries to restore limb motor function. This paper takes wearable lower limb rehabilitation exoskeleton as the research object, and its main contents are mechanical structure design, kinematics analysis, gait planning, virtual prototype simulation, and experimental verification and analysis. Based on the physiological characteristics of human body and the principle of comfortable and reliable wearing, this paper designs wearable exoskeleton for lower limb rehabilitation. Firstly, the physiological structure characteristics and movement mechanism of human lower limbs were studied and analyzed. By referring to the rotation range and height and size of each joint of human lower limbs, the overall scheme of wearable lower limb rehabilitation exoskeleton was designed and the degree of freedom was allocated. At the same time, Solidworks was used to establish a three-dimensional model. On the basis of a 3D model, a kinematics model was established, and the forward kinematics solution was obtained by using homogeneous coordinate transformation. Since the inverse kinematics solution was relatively complicated, the inverse kinematics solution was conducted in this paper according to the geometric relations of the joints of the lower limbs. Kinematics analysis of the exoskeleton structure of wearable lower limb rehabilitation was carried out to lay a theoretical foundation for gait planning. The off-line gait planning was carried out by using the method based on ZMP stability criterion, and the gait planning was divided into five stages: squat, start, middle step, stop and rise, and the motion trajectory of the center of mass and ankle joint was planned. Based on the inverse kinematics formula, the function of the change of joint angle with time in walking process is derived. The virtual prototype is established in ADAMS, and the simulation of virtual prototype is carried out by using the function of gait planning's joint angle and time. The correctness of structural design and gait planning was verified by measuring the trajectories of the centroid and ankle joints in each gait stage and the functional relationship between the rotation angle of each joint and time. Then, using a 3D dynamic capture system to capture the human lower limb motion trajectory of each joint, each joint trajectory data output, using the MATLAB software to output data, gets the joint trajectory change over time function curve and is used to verify feasibility and applicability of human gait planning. Through the research and analysis of the joints of the lower limbs of the human body, it can be concluded that the hip joint and the knee joint have 3 degrees of freedom, respectively, and the knee joint has 1 degree of freedom.

Optimisation of Reference Gait Trajectory of a Lower Limb Exoskeleton

Simulating Human–machine Coupled Model for Gait Trajectory Optimization of the Lower Limb Exoskeleton System Based on Genetic Algorithm

Optimization-Based Adaptive Assistance for Lower Limb Exoskeleton Robots with a Robotic Walker Via Spatially Quantized Gait

On the Kinematic Design of Anthropomorphic Lower Limb Exoskeletons and Their Matching Movement

Human-in-the-Loop Trajectory Optimization Based on sEMG Biofeedback for Lower-Limb Exoskeleton

Hip Joint Trajectory Generation Based on Human Limb Motion Synergy

Adaptive Gait Trajectory Based on Iterative Learning Control for Lower Extremity Rehabilitation Exoskeleton

The Wearable Lower Limb Rehabilitation Exoskeleton Kinematic Analysis and Simulation

Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint

A Stepping Gait Trajectory Design Based on Hip Height Variation of Swing Leg for the Balance of Lower Extremity Exoskeleton.

Adaptive gait generation based on pose graph optimization for Lower-limb Rehabilitation Exoskeleton Robot

Design and analysis of a lower limb assistive exoskeleton robot

Method for lower extremity exoskeleton's ankle joint trajectory to track human's in swing phase

Adaptive Control of Lower-Limb Exoskeletons for Walking Assistance Based on Inter-Joint Coordination

Mechanical Design and Optimization on Lower Limb Exoskeleton for Rehabilitation

Design and Experimental Verification of a Hip Exoskeleton Based on Human-Machine Dynamics for Walking Assistance

Imposing Healthy Hip Motion Pattern and Range by Exoskeleton Control for Individualized Assistance

Dynamics simulation of lower extremity exoskeleton based on human gait

Design of an anthropomorphic lower extremity exoskeleton with compatible joints

Kinematics Analysis and Optimization of the Exoskeleton'S Knee Joint

Dynamic trajectory adjustment of lower limb exoskeleton in swing phase based on impedance control strategy