Abstract:The application of unmanned aerial vehicle (UAV)-borne ground penetrating radar (GPR) for subsurface detection has garnered considerable attention. The estimation of subsurface velocity using diffraction-focusing-based methods is integral to the reconstruction of subsurface structures. Nevertheless, such methods are challenged by the influence of reflections on diffraction analysis, and regions of noninterest impede the accuracy of media velocity estimation. In this study, we introduce a processing scheme to solve these problems. First, a common reflection surface (CRS)-based approach is implemented to identify and mitigate reflections from raw GPR B-scan data, leveraging a directional filter function derived from CRS wavefront characteristics. The optimization process is refined by selecting key parameter ranges based on the first Fresnel zone. Second, a weighted negative entropy-based velocity estimation approach is realized by integrating a weighting function into the statistical negative entropy (NE) calculation. These weight factors, derived from the air-coupled GPR travel time model, accentuate hyperbolic features, thereby elevating resolution in time-velocity (t–v) panels. The efficacy of our scheme in separating wavefields is demonstrated by the diffraction-to-reflection ratio (DRR) of 6.544 in simulations and 4.510 in field experiments, representing improvements of approximately fivefold and threefold, respectively. The resolution of t–v panels with the proposed scheme increases by more than 20%, highlighting its superiority in estimating media velocity. In the reconstructed images, the maximum depth-estimation error is 5.22%, and the root-mean-square relative error (RMSRE) is 3.37% in simulation. In the field test, the signal-to-noise ratio improvement shows the target's return power at 14.8 dB above the noise floor, and the depth-estimation error is 4.41%.

Enhanced GPR Signal for Layered Media Time-Delay Estimation in Low-SNR Scenario

Layered Media Q Estimation for GPR Signal Processing Using the Frequency Shift Method

Multi-resolution GPR Clutter Suppression Method Based on Low-Rank and Sparse Decomposition

Parameter Estimation of Layered Media Based on GPR Time-Frequency Spectrum Inversion

Deep Learning-Based Time Delay Estimation Using Ground Penetrating Radar

The Layered Media Inverse Q Filtering Algorithm For Gpr Signals Processing Based On Wavefield Downward Continuation

A Time-Delay Estimation Algorithm of GPR Recording Profile Based on Sliding Window

Estimation of Echo Amplitude and Time Delay for OFDM-Based Ground-Penetrating Radar.

Gpr Signal Denoising and Target Extraction with the Ceemd Method

Signal-to-Noise Ratio Enhancement in Multichannel GPR Data Via the Karhunen-Loeve Transform

Parameter Inversion by a Modified Reflected Signal Reconstruction Method for Thin-Layered Media

A Clutter Suppression Method Based on LSTM Network for Ground Penetrating Radar

CMP Antenna Array GPR and Signal-to-Clutter Ratio Improvement

A Constrained Diffusion Model for Deep GPR Image Enhancement

Enhanced CRS-Based Wavefield Separation and WNE-Based Velocity Estimation for UAV-Borne GPR Data Processing

Improving the Lateral Detection Performance of GPR Based on Beamforming.

A novel low-frequency coded ground penetrating radar for deep detection

Layered Media Inversion Network Applied in Ground Penetrating Radar

Sparse MIMO Array Forward-Looking GPR Imaging Based on Compressed Sensing in Clutter Environment

Layered Media Parameter Inversion Based on Common Middle Point Model and Pattern Search Method

GPR denoising via shearlet transformation and a data-driven tight frame