Abstract:A staggered woven mesh (SWM) aerator equipped with three variable-micropore layers was developed to enhance the CO2 conversion into HCO3- in a recycling water pipeline for promoting CO2 utilization efficiency and Arthrospira growth in large-scale raceway ponds. The input CO2 gas was broken into smaller bubbles (0.78- 2.43 mm) through the first-stage shear with axial rectangles, second-stage shear with radial rectangles (equivalent pore diameter = 150 μm), and third-stage shear with uniform micropores. A high-speed camera (MotionXtra HG-100K CMOS) and an Image J image processing software were employed to capture the bubble pictures. Compared to the traditional steel pipe (TSP) aerator, the bubble generation diameter and time in the SWM aerator reduced by 72.3% and 48.6%, respectively. The optimized structure (ε = 14, pore = 23 μm) of the SWM aerator promoted the carbonization efficiency and HCO3- conversion efficiency into biomass by 78.6% and 64.6% than the TSP aerator. Further, the chlorophyll fluorescence and biomass measurements showed an increase in the actual photochemical efficiency (analyzed by Hansatech FMS1 chlorophyll fluorescence instrument) and biomass yield by 1.8 times and 80.1%.

Optimizing Gas Transfer to Improve Growth Rate of Haematococcus Pluvialis in a Raceway Pond with Chute and Oscillating Baffles.

Improving Microalgal Growth with Reduced Diameters of Aeration Bubbles and Enhanced Mass Transfer of Solution in an Oscillating Flow Field

Improving Microalgal Growth with Small Bubbles in a Raceway Pond with Swing Gas Aerators.

Improving CO2 fixation with microalgae by bubble breakage in raceway ponds with up-down chute baffles.

Enhanced Solution Velocity Between Dark and Light Areas with Horizontal Tubes and Triangular Prism Baffles to Improve Microalgal Growth in a Flat-Panel Photo-Bioreactor.

Numerical simulation on vortex flow and CO2 bubble aggregation behavior in a raceway pond with diaphragm aerators

Alternatively Permutated Conic Baffles Generate Vortex Flow Field to Improve Microalgal Productivity in a Raceway Pond.

Optimizing the Growth of Haematococcus Pluvialis Based on a Novel Microbubble-Driven Photobioreactor.

Enhancing Vorticity Magnitude of Turbulent Flow to Promote Photochemical Efficiency and Trichome Helix Pitch of Arthrospira Platensis in a Raceway Pond with Conic Baffles.

Improving the CO2 Fixation Rate by Increasing Flow Rate of the Flue Gas from Microalgae in a Raceway Pond

Enhanced flashing light effect with up-down chute baffles to improve microalgal growth in a raceway pond.

Improving flashing light frequency and CO<sub>2</sub> fixation rate with vortex movement of algal cells in raceway pond with conic baffles

Strengthening Mass Transfer of Carbon Dioxide Microbubbles Dissolver in a Horizontal Tubular Photo-Bioreactor for Improving Microalgae Growth

Enhancing Microalgal Biomass Productivity with an Optimized Flow Field Generated by Double Paddlewheels in a Flat Plate Photoreactor with CO2 Aeration Based on Numerical Simulation

Developing a Spiral-Ascending CO<sub>2</sub> Dissolver to Enhance CO<sub>2</sub> Mass Transfer in a Horizontal Tubular Photobioreactor for Improved Microalgal Growth

Improving Growth Rate of Microalgae in a 1191m2 Raceway Pond to Fix CO2 from Flue Gas in a Coal-Fired Power Plant

Generating Cycle Flow Between Dark and Light Zones with Double Paddlewheels to Improve Microalgal Growth in a Flat Plate Photo-Bioreactor.

Promoting Sludge Quantity and Activity Results in High Loading Rates in Anammox UBF.

Improving Microalgal Growth by Strengthening the Flashing Light Effect Simulated with Computational Fluid Dynamics in a Panel Bioreactor with Horizontal Baffles

Developing staggered woven mesh aerator with three variable-micropore layers in recycling water pipeline to enhance CO2 conversion for improving Arthrospira growth

Decrease in Light/dark Cycle of Microalgal Cells with Computational Fluid Dynamics Simulation to Improve Microalgal Growth in a Raceway Pond.