Abstract:Porous media in thermal collectors have been found to enhance the performance of photovoltaic thermal systems. However, there is a lack of comprehensive research on the benefits of using porous media in this context. This paper represents the first comprehensive study comparing various types of porous materials and their effects on system performance. The study employs a three-dimensional simulation to analyze the influence of factors such as material type, porosity, permeability, and thermal conductivity on module efficiency in top, middle, and fully filled configurations. In particular, it has been observed that each material has an optimum porosity, and there is little difference among metal foams, ceramic foams, and ordinary materials, such as aluminum and copper screens. Among the different configurations, the middle configuration had the lowest thermal efficiency improvement (similar to 17 %), the top configuration increased efficiency by similar to 7 %, and the full porous configuration had the highest thermal efficiency improvement, 32 %. Materials with very low conductivity, such as wood, perform better in the middle than in the top configuration. Graphite, despite its high thermal conductivity, has low permeability, which leads to lower thermal efficiency compared to that of most other materials in the top configuration. In the full configuration and particularly in the middle configuration, graphite shows the smallest thermal efficiency improvement due to its significant longitudinal conduction heat transfer. Therefore, in these configurations, graphite is not recommended for use as a porous medium. Regarding added mass, metal foam materials add the most mass to the system, followed by ceramic foam materials, which present considerably lower figures. In all cases, the pump power consumption growth is negligible compared to the photovoltaic power output. In all materials and configurations, there was a small improvement in electrical efficiency, reaching 1.25 % in the full porous configuration. From a holistic perspective, this study showed that porous media can improve the overall equivalent power by up to 9.8 %, compared to a smooth channel.

Thermal and isothermal performance analyses for heat and moisture transfer in unsaturated porous media in emitting and extracting modes

Characteristics of Wave Propagation in the Saturated Thermoelastic Porous Medium

Exact Solutions for Investigating Thermal Response of Saturated Soil Induced by Temperature Change

Effect of Thermal Intensity and Initial Moisture Content on Heat and Moisture Transfer in Unsaturated Soil

Pore-to-meter Scale Modeling of Heat and Mass Transport Applied to Thermal Energy Storage: How Local Thermal and Velocity Fluctuations Affect Average Thermal Dispersivity

Effects of heat and moisture transfer on the transient dynamic of solute transport in unsaturated soil under isothermal and thermal conditions

Comprehensive analysis of thermo-mechanical responses in collapsible soil under varied water content conditions

Thermal Performance Analysis of Porous Media Receiver with Concentrated Solar Irradiation

Analytical and numerical investigation of heat transfer of porous fin in a local thermal non-equilibrium state

Pore unit cell network modeling of the thermal conductivity dynamics in unsaturated sandy soils: Unveiling the role of spanning‐wetting phase cluster

Thermal Performance of Energy Piles in Unsaturated Soils: Experiment, Simulation, and Case Study

A comprehensive investigation of porous media's effects on the performance of photovoltaic thermal systems

Heat and Mass Transfer with Condensation in Non-Saturated Porous Media

Effect of dry density, soil texture and time-spatial variable water content on the soil thermal conductivity

Saturation Dependence of Thermal Conductivity of Soils: Classification and Estimations

A Comprehensive Investigation of Porous Media’s Effects on the Performance of Photovoltaic Thermal Systems

Heat and Moisture Transfer in a Rectangular Cavity Partially Filled with Hygroscopic Porous Media

Heat Conduction and Heat Storage Characteristics of Soils

Thermal performance analyses of porous media solar receiver with different irradiative transfer models

A Comparative Study of Computing Methods of Soil Thermal Diffusivity, Temperature and Heat Flux

Feasibility study and thermoeconomic analysis of cooling and heating systems using soil for a residential and greenhouse building