Abstract:The tilt angle of a cold atom gravimeter (CAG) could have a significant influence on the measurement of absolute gravity. The measurement, manipulation, and compensation of the tilt for CAG need to be conducted in order to obtain a high-accuracy absolute gravity measurement. In this paper, firstly, the influences of tilt on absolute gravity measurement under four different conditions are analyzed theoretically by taking into account the position of vacuum system relative to Raman retro-reflection mirror. Then, the experimental investigation is carried out and it is found that the measured results agree well with the theoretical prediction curves. According to the analysis above, we design a scheme for absolute gravity measurement based on two inclinometers, mainly to solve the problem of long-term tilt drift of CAG especially in harsh measurement environment. In this scheme, a high-resolution inclinometer is used to record the tilt angle of Raman retro-reflection mirror, which is fixed on a passive vibration isolation platform. Besides, another inclinometer is utilized to monitor the tilt angle of vacuum chamber of the CAG. By doing so, the vibration noise can be suppressed and the tilt data can be measured with a high precision. Finally, the experimental verification of this proposal is carried out based on our homemade compact cold atom gravimeter, and the high accuracy absolute gravity measurement is realized in a complex workshop environment. Since the vibration noise of Raman mirror is improved by using the vibration isolation platform, the sensitivity of our CAG can reach 319 μGal √Hz. Besides, we measure the long-term changes of gravity with time and find that the experimental results are consistent with the curves calculated by theoretical tidal model. Moreover, due to the precise measurement and compensation for the tilt drift, the accuracy of our CAG is estimated at 12.3 μGal. In order to evaluate this system accuracy, a comparison between our CAG and the FG5 at the same measured site is made. The absolute gravity values determined by both gravimeters coincide with each other. In this paper, we provide a feasible scheme for measuring the absolute gravity in the complex environment. The experimental demonstration of this measurement scheme is performed thereby acquiring some valuable reference data for the practical use of CAG.

Research on Supporting Mounts of Spheres in Measurement of Gravitational Constant G.

Measurements of the gravitational constant using two independent methods

Determining the Eccentricity of Source Masses in the Measurement of Newtonian Gravitational Constant Using an Air-Bearing Method

Determination of the Newtonian gravitational constant G with time-of-swing method

Measurement of the Newtonian Constant of Gravitation $G$ by Precision Displacement Sensors

Precision measurement of the Newtonian gravitational constant

G measurements with time-of-swing method at HUST

Measurement of the Newtonian Gravitational Constant Based on the Principle of Free Fall

A new high precision absolute gravimeter

A Determination of the Local Gravitational Acceleration for the Tsinghua Tabletop Kibble Balance

Measurement of Absolute Gravity Based on Cold Atom Gravimeter at Large Tilt Angle

Experiment on Dynamic Absolute Gravity Measurement Based on Cold Atom Gravimeter

Reducing the Time Consumption of Vibration Correction Methods for Absolute Gravimeters

Analysis and Comparison of the Vibration Correction Accuracy of Different Optimization Objectives for the Classical Absolute Gravimeter.

An Optimized Vibration Correction Method for Absolute Gravimetry

A Atmospheric Correction of FG5 Absolute Gravimetry Data using Measured Air Pressure

Participation in the absolute gravity comparison with a compact cold atom gravimeter

Position Determination and Measurement Error Analysis for the Spherical Proof Mass with Optical Shadow Sensing

Comparison of the Absolute Gravity Measurements Obtained with China and Japan Instruments

A vibration correction method for free-fall absolute gravimeters