Abstract:The helical-coiled once-through steam generator (H-OTSG) is widely used in small modular reactors due to its compactness and higher heat transfer efficiency. In this study, an experimental and numerical simulation study of the thermalhydraulics characteristics of HOTSG under different thermal power conditions was carried out, and the experimental results were used to verify the onedimensional system code SGTH1D. The configuration consists of 85 helically coiled tubes divided into ten layers according to the coil diameter. Both steadystate experiments and flow instability experiments were conducted under thermal power condition ranging from 06 MW to 23 MW. Firstly, the steadystate experimental results show the difference between the shellside inlet temperature and the tubeside outlet temperature increases with thermal power, which is due to the decreasing of the heat transfer capacity of the HOTSG. Sensitivity analysis of the system parameters shows that the shellside pressure has little effect on the average heat transfer coefficient. And the average heat transfer coefficient also is insensitive to tubeside pressure and shellside inlet temperature under low thermal power conditions. However, under low thermal power conditions, the average heat transfer coefficient increases with the decrease of the tubeside pressure and the increases of the shellside inlet temperature. Secondly, the flow instability experimental results show that the increase of the thermal power can stabilize the HOTSG and decrease the inlet throttling of the flow instability thresholds because the length of the subcooled singlephase region increases with the thermal power. The sensitivity analysis of the system parameters shows that the increase of the tubeside pressure and the decrease of the shellside inlet temperature are beneficial to the stability of the system. The influence of the shellside parameters on the flow instability threshold is weaker than that of the tubeside parameters. Finally, a numerical study on the thermal-hydraulics characteristics of the configuration was carried out in the present study. By comparing the experimental data with the numerical simulation results of the SGTH1D code, the accuracy of the SGTH1D code in predicting the steadystate heat transfer characteristics and flow instability of configuration was verified. The SGTH1D code can accurately predict the heat transfer rate of the HOTSG under various thermal power conditions, and the prediction errors of shellside and tubeside outlet temperatures are within ±1 ℃. The numerical results of flow instability characteristics of the SGTH1D code are conservative at low thermal power condition, and the error of numerical results is within ±20% when the thermal power is larger than 12 MW.

Thermal-hydraulic analysis of once-through steam generator with annular narrow slot tube

THERMAL HYDRAULICS ANALYSIS OF A HIGH-PERFORMANCE ONCE-THROUGH STEAM GENERATOR WITH ANNULAR NARROW SLOT TUBE

Model-Based Load Following Control for Helical-Coiled Supercritical Steam Generator of MHTGR

Study on the Systematic Thermal-Hydraulic Characteristics of Helical Coil Once-Through Steam Generator

Experimental and Numerical Study on Thermal-hydraulics of Helical-coiled Once-through Steam Generator of Small Modular Pressurized Water Reactor

Development of a 1d Code for Heat Transfer Characteristics of Helical-Coiled Once-Through Steam Generators

Thermal-hydraulic Characteristics Analysis Method of Helical Coil Steam Generator in High Temperature Gas Reactor

A Differential-Algebraic Model for the Once-Through Steam Generator of MHTGR-Based Multimodular Nuclear Plants

Development and application of the helically coiled once-through steam generator module for dynamic simulation of nuclear hybrid energy system

Numerical Analysis of Liquid Metal Helical Coil Once-Through Tube Steam Generator

Thermal Analysis of A Helical Tube Once Through Steam Generator of Htgr

Development of a Computer Code for Thermal–hydraulic Design and Analysis of Helically Coiled Tube Once-Through Steam Generator

Comparative Thermal Analyses Between Theoretical Mode and RELAP5 Code Simulation for OTSG of a Small PWR

Numerical Investigation on the Thermal-Hydraulic Performance of Separated Structure Steam Generator with Different Tube Arrangements

A Movable Boundary Model for Helical Coiled Once-Through Steam Generator Using Preconditioned JFNK Method

Thermal Analysis of HTGR Helical Tube Once Through Steam Generators Using 1D and 2D Methods

Numerical Analysis of the Flow Behavior in a Helically Coiled Once Through Steam Generator

Code improvement, separate-effect validation, and benchmark calculation for thermal-hydraulic analysis of helical coil once-through steam generator

Thermal-hydraulic analysis of helical coil once-through steam generators under complex oceanic conditions

Study on the Thermal and Geometrical Parameters of Helical Coil Once-Through Steam Generator System

DEVELOPMENT OF A THERMAL-HYDRAULIC ANALYSIS CODE FOR HELICAL COILED ONCE THROUGH STEAM GENERATOR