Graphene Oxide/Nanofiber-Based Actuation Films with Moisture and Photothermal Stimulation Response for Remote Intelligent Control Applications
Wen Wang,Shuang Wang,Chenxue Xiang,Shuying Liu,Mufang Li,Dong Wang
DOI: https://doi.org/10.1021/acsami.1c11117
2021-09-29
Abstract:The rapid development of intelligent technology and industry has induced higher requirements for multifunctional materials, especially intelligent materials with stimulus-responsive self-actuation behavior. In this study, a /GO composite actuation film, with an asymmetric sandwich structure, was prepared by attaching graphene oxide (GO) to the surface of a polyvinyl alcohol ethylene copolymer (PVA-co-PE) nanofiber composite film containing copper nanoparticles (Cu) through layer-on-layer adsorption. This unique structural design endowed the composite film with not only excellent structural stability but also different bending directions (in response to moisture and infrared light). The actuation performance shows that when the adsorption time was 4 h, the maximum bending angle of the /GO composite film was up to 90° within 5.99 s. Furthermore, the actuation behavior was stable after 100 cycles of reversible moisture stimulation. Additionally, the maximum actuation strain of the composite film was up to 1.35 MPa during the illumination time of 6.8 s and maintained an excellent stability for 400 s under continuous infrared stimulation of 0.53 W/cm2. The rapid and sensitive stimulus response of the /GO composite film exhibited self-actuation behavior under the remote control of moisture and infrared light. This, in turn, suggests prospects for wide applications in emerging technologies, such as intelligent switches, artificial muscles, intelligent medical treatment, and flexible robots.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c11117.Optical images of the single GO film and the co-PE/GO-4 composite film immersed in water for 30 min; XRD patterns of the /GO-4 composite film and pure GO; section SEM images of the co-PE/GO composite film with different GO adsorption times; variation in the GO content in the co-PE/GO composite film with different adsorption times; flexible display of the co-PE/GO-4 composite film; ATR-IR spectra show the moisture exchange between the co-PE/GO-4 composite film and ambient air (RH = 45%); change in instantaneous bending angular velocity of the co-PE/GO composite films with different adsorption times during the whole actuation process; change in the bending angular velocity of the co-PE/GO-4 composite films with different water temperatures during the whole actuation process; directional bending deformation design of the co-PE/GO-4 composite films (moisture stimulation); ATR-IR spectra show the moisture exchange between the co-PE/GO composite film and ambient air; and bending angle changes of the co-PE/GO composite film (PDF)Stability of single GO film and the co-PE/GO-4 composite film subjected to external force stimulation after immersion in water for 30 min (MP4)State of the co-PE/GO-4 composite film before and after brief immersion in water (MP4)Straight crawling process of the /GO-4 composite film on a plane (AVI)Actuation process of the /GO-4 composite film in water (AVI)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology