Abstract:Triboelectric nanogenerators (TENG) based on natural biomaterials are essential for energy-harvesting applications. In this work, an efficient approach was proposed to enhance the electrical performance of chitosan (CS), which is a naturally occurring biopolymer with the incorporation of polyethylenimine-grafted graphene oxide (PEI-GO) nanoparticles. Triboelectric properties of the different weight combinations of PEI-GO in CS were tested against polytetrafluoroethylene (PTFE). An improvement in the mechanical and electrical properties of the nanocomposites was observed in comparison to pure chitosan. Thus, the composite with 10 wt % PEI-GO was used as the positive layer in the TENG device, and an open-circuit voltage (V oc) of ∼222 V, short circuit current (I sc) of ∼6.6 μA, and transfer charge (Q sc) of ∼149.6 nC were observed. Almost a 5.5 fold increase of the output power (∼1465.2 μW) and its power density (∼407 mW/m2) were seen for the nanocomposite in comparison to that of pure CS. The TENG was able to power calculators and wristwatches and light up 126 blue light-emitting diodes (LEDs). Further, a TENG was fabricated with the same polymer (CS and CS nanocomposite) as tribo-layers, where the pure CS polymer acts as the tribo-negative layer and PEI-GO-incorporated CS acts as the tribo-positive layer in the CS polymer-based TENG. The device was found to light up 14 white LEDs with the human hand tapping. This study thus presents opportunities for utilizing biomechanical energy found in everyday life to power bioelectronics with bioderived materials.

Natural polymers based triboelectric nanogenerator for harvesting biomechanical energy and monitoring human motion

Milk-based Triboelectric Nanogenerator on Paper for Harvesting Energy from Human Body Motion

Silicon rubber/expandable microsphere based triboelectric nanogenerator for harvesting biomechanical energy

Flexible and Extendable Honeycomb‐Shaped Triboelectric Nanogenerator for Effective Human Motion Energy Harvesting and Biomechanical Sensing

High-performance triboelectric nanogenerator based on chitin for mechanical-energy harvesting and self-powered sensing

Metal-free Flexible Triboelectric Nanogenerator based on Bifunctional Carbon Fiber for Mechanical Energy Harvesting and Human Activity Monitoring

Flexible single-electrode triboelectric nanogenerator with MWCNT/PDMS composite film for environmental energy harvesting and human motion monitoring

Electrospun ZnSnO3/PVDF-HFP Nanofibrous Triboelectric Films for Efficient Mechanical Energy Harvesting

Chitosan Nanocomposite-Based Triboelectric Nanogenerators with Enhanced Electrical Performance: An Opportunity for Bioelectronics

Accordion-inspired parallelly assembled triboelectric nanogenerator: For efficient biomechanical energy harvesting and music responding

Flexible and stretchable triboelectric nanogenerator fabric for biomechanical energy harvesting and self-powered dual-mode human motion monitoring

Low-cost, environmentally friendly and high-performance cellulose-based triboelectric nanogenerator for self-powered human motion monitoring

Flexible, Wash-Resistant Human Mechanical Energy Harvesting and Storage System for Monitoring Human Movement

Triboelectric nanogenerator based on silane-coupled LTA/PDMS for physiological monitoring and biomechanical energy harvesting

PEO/cysteine composite nanofiber-based triboelectric nanogenerator for tiny mechanical energy harvesting

Wearable Triboelectric Nanogenerator with Ground-Coupled Electrode for Biomechanical Energy Harvesting and Sensing

Biopolymer and Biomimetic Techniques for Triboelectric Nanogenerators (TENGs)

Sustainable Biopolymers in Eco‐Friendly Triboelectric Energy Harvesting

A Tubular Flexible Triboelectric Nanogenerator with a Superhydrophobic Surface for Human Motion Detecting

Waterproof And Stretchable Triboelectric Nanogenerator For Biomechanical Energy Harvesting And Self-Powered Sensing

High-output triboelectric nanogenerator based on L-cystine/nylon composite nanofiber for human bio-mechanical energy harvesting