Abstract:Polyimide film (Kapton) is an important polymer material used for the construction of spacecrafts. The performance of Kapton can be degraded for atomic oxygen erosion in space. Commonly used atomic oxygen protective layers have issues such as poor toughness and poor adhesion with the film. In this paper, Kapton/Al2O3 nanocomposite films were prepared via an ion exchange method, and the optical properties, mechanical properties, and mechanisms for the change in the mass and microstructure, before and after atomic oxygen exposure, were analyzed. The results show that the deposition of the Kapton/Al2O3 surface nanocomposite film prepared via the ion exchange method has no obvious effects on the internal structure and optical transmittance of the Kapton film matrix. The tensile strength and elongation of the prepared film were much higher than those of the pure Kapton film, demonstrating its good flexibility. Scanning electron microscope (SEM) analysis showed that the etching pits had a carpet-like morphology on the composite film surface and were relatively small after atomic oxygen erosion. In contrast with the C–C bond rupture in the oxydianiline (ODA) benzene in Kapton films, the Kapton/Al2O3 nanocomposite film mainly destroyed the C=C bond in the pyromellitic dianhydride (PMDA) benzene ring. On exposure to an atomic oxygen environment for a short period, the Kapton/Al2O3 nanocomposite film exhibited improved atomic oxygen erosion resistance because the Al2O3 layer inhibited atomic oxygen diffusion. With increasing atomic oxygen exposure time, the atomic oxygen diffused into the Kapton matrix via the pores of the Al2O3 layer, causing damage to the substrate. This resulted in a detachment of the surface Al2O3 layer and exposure of the Kapton matrix, and thereby the atomic oxygen resistance was decreased. The applicability of the ion exchange mechanism of trivalent Al element on the surface modification of the polyimide is explored in this study. The behavior of the Kapton/Al2O3 composite film under the atomic oxygen environment of space is investigated, which provides the basis for studying the effects of atomic oxygen on the flexible protective Kapton film.

Shielding Kevlar fibers from atomic oxygen erosion via layer-by-layer assembly of nanocomposites

Studies on the Erosion Mechanism of Kapton and Its Protective Effect

Atomic Oxygen Adaptability of Flexible Kapton/Al2O3 Composite Thin Films Prepared by Ion Exchange Method

Damage and degradation of mechanical properties of polyimide-based materials under atomic oxygen attack: A molecular dynamics simulation study

Structural Design of Two Types of Composites with High Resistance to Atomic Oxygen Attack Based on Polyimide Matrices: A Molecular Dynamics Simulation Study

Mechanically Robust Irradiation, Atomic Oxygen, and Static-Durable CrO x /CuNi Coatings on Kapton Serving as Space Station Solar Cell Arrays

Ground-based investigations of atomic oxygen erosion behaviors of Al2O3 coating on kapton

Atomic oxygen resistance and tribological performance of a self-stratifying Polydimethylsiloxane-polyamide-imide/molybdenum disulfide lubricating coating

Flexible and gradually bonded metal organic framework coatings for atomic oxygen protection of polyimide films

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Unparalleled Armour for Aramid Fiber with Excellent UV Resistance in Extreme Environment

The effects of atomic oxygen and ion irradiation degradation on multi-polymers: A combined ground-based exposure and ReaxFF-MD simulation

Preparation and characterization of shear thickening fluid/carbon nanotubes/Kevlar composite materials

Property of Protection against Simultaneous Action between Atomic Oxygen Erosion and Ultraviolet Irradiation by MIL-53(Al) Coating

Mechanism Analysis and Potential Applications of Atomic Oxygen Erosion Protection for Kapton-Type Polyimide Based on Molecular Dynamics Simulations

Ablation Behaviors and Mechanism of Ultra‐thick Anti‐oxidation Layer Coating on Carbon‐bonded Carbon Fiber Composites

Millefeuille-inspired highly conducting polymer nanocomposites based on controllable layer-by-layer assembly strategy for durable and stable electromagnetic interference shielding

Development of Cycloaliphatic Epoxy-POSS Nanocomposite Matrices with Enhanced Resistance to Atomic Oxygen

Reactive Molecular Dynamics Study of the Mechanism and Effect of Various Protective Coatings on the Protection of Polyimide Antierosion from Atomic Oxygen

Enhancing Bioinspired Aramid Nanofiber Networks by Interfacial Hydrogen Bonds for Multiprotection under an Extreme Environment.

Simple and scalable synthesis of super-repellent multilayer nanocomposite coating on Mg alloy with mechanochemical robustness, high-temperature endurance and electric protection