Abstract:Nano-materials are increasingly being used as modified binder for improve the performance of cementitious materials. In this paper, nano-SiO2 and nano-Al2O3 were incorporated into the geopolymers formed by the mixture of construction solid waste (recycled concrete fine powder) and industrial solid waste (slag). The effects of the type and content of nanomaterials on the early reaction kinetics, physical and mechanical properties and microstructure of geopolymer composites were explored. Results show that the addition of nanomaterials mainly affected the dissolution stage of geopolymerization, played a nucleation effect and improved the reaction rate. The promotion effect of nano-Al2O3 was slightly greater than that of nano-SiO2. Based on the results of JMAK model, the formation of geopolymers composites was an one-dimensional heterogeneous nucleation control reaction, which followed a plate-like structure thickening mechanism. The addition of nanomaterials shortened the setting time. The incorporation of nano-Al2O3 was beneficial to improve the fluidity of geopolymer. Furthermore, the addition of the two nanomaterials could improve the compressive strength of geopolymers. The compressive strength tended to first increase and then decrease with increasing nano-SiO2 or nano-Al2O3 content. The optimal mixing ratio of nano-silica and nano-alumina were 1.2% and 1.6% respectively, and the 28-day compressive strengths were both 59.05 MPa, which were 23.35% higher than that without nano-materials. XRD and SEM-EDS analysis indicate that the incorporation of nanomaterials had no impact on the type of final products, but increased their number, particularly calcium-based gel products. The internal structure of geopolymer with nanomaterials was more dense and uniform than that without nanomaterials. The MIP observed that the addition of the two nano-materials reduced the porosity in the matrix, the number of macropores and the pore fractal dimension. The pore fractal dimension of geopolymer was negatively correlated with the compressive strength.

Synthesis and Characterization of Geopolymer from Bayer Red Mud with Thermal Pretreatment

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

Synthesis, Characterization, and Mechanical Properties of Red Mud–Based Geopolymers

Synthesis And Characterization Of Geopolymers From Coal Gangue, Fly Ash And Red Mud

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Synthesis and Characterization of Red Mud and Rice Husk Ash-Based Geopolymer Composites

Preparation mechanism and properties of thermal activated red mud and its geopolymer repair mortar

Feasibility study of red mud-blast furnace slag based geopolymeric grouting material: Effect of superplasticizers

Preparation and Properties of Porous Concrete Based on Geopolymer of Red Mud and Yellow River Sediment

Preparation of geopolymer concrete with Bayer red mud and its reaction mechanism

Interfacial Behavior of Slag, Fly Ash, and Red Mud-Based Geopolymer Mortar with Concrete Substrate: Mechanical Properties and Microstructure

Mechanical Properties of Geopolymers Synthesized from Fly Ash and Red Mud under Ambient Conditions

Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Utilization of municipal solid waste incineration fly ash with red mud-carbide slag for eco-friendly geopolymer preparation

Alkali-hydrothermal activation of tailings with red mud as a supplementary alkali source to synthesize one-part geopolymer

Reaction kinetics, mechanical properties, and microstructure of nano-modified recycled concrete fine powder/slag based geopolymers

Silty Clay Stabilization Using Metakaolin-Based Geopolymer Binder

Experimental investigation on the mechanical performance and microscopic characterization of desulfurization gypsum-reinforced ternary geopolymer

Pb2+ and Cr3+ immobilization efficiency and mechanism in red-mud-based geopolymer grouts

Mechanical properties and microstructure of red mud-coal metakaolin geopolymer concrete based on orthogonal tests