Abstract:In this technical note, an innovative thorium-uranium-fueled fusion-fission hybrid reactor (FFHR) design that employs a dual-coolant system to enhance U-233 breeding and is based on a three-dimensional engineering model is presented. The reactor consists of two kinds of modules: a water-cooled, thermal spectrum power generation natural uranium-fueled module and helium-cooled, fast spectrum fissile-breeding natural thorium-fueled modules, which are arranged alternately in the poloidal direction of the blanket. An interesting and important neutronic characteristic of the FFHR is found in this technical note: Energy multiplication is primarily determined by the uranium module parameters and is almost independent of the thorium module parameter. Uranium module design should first consider improving energy production. The Th-232 neutron capture rate is primarily determined by the thorium module parameters. The uranium module parameter has almost no influence on the Th-232 neutron capture rate in the thorium module. The uranium and thorium modules have weak coupling in neutronic behavior. However, with the fixed design parameters of the uranium and thorium modules, the most important influencing factor on energy multiplication factor M (the ratio of total blanket energy output and the fusion energy) and the U-233 breeding rate is the fraction of the external fusion neutron source irradiated on the uranium or thorium module or the blanket coverage rate of the uranium or thorium modules. Based on this characteristic, an innovative hybrid reactor design that employs a dual-coolant system is proposed in this technical note. Uranium modules still use water as the coolant to maintain a high energy multiplication factor, whereas helium is used as the coolant for the thorium module to obtain a fast neutron spectrum to enhance the U-233 breeding. The simulation results show that the helium-cooled thorium module is 2.5 times more efficient in U-233 breeding compared to the original water-cooled thorium module design. Approximately 10 tons of U-233 is produced after 20 years of operation for the helium-cooled thorium module design.

Progress in Physics Design of Fusion-Fission Hybrid Energy Reactor

Recent Progress in Chinese Fusion Research Based on Superconducting Tokamak Configuration

A Preliminary Work on the Preparation for Neutron Irradiation of Advanced Fusion Materials Using Small Samples in China

The Neutronics Studies of A Fusion Fission Hybrid Reactor Using Pressure Tube Blankets

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

A Fusion–fission Hybrid Reactor with Water-Cooled Pressure Tube Blanket for Energy Production

Shielding Design and Analysis of Fusion–Fission Hybrid Energy Reactor Blanket

The Neutronics Studies of Fusion Fission Hybrid Power Reactor

Conceptual Design and Comprehensive Optimization Analysis of a Fusion-Fission Hybrid Reactor Water-Cooled Pressure Tube Blanket

Neutronic Study of an Innovative Thorium-Uranium–Based Fusion-Fission Hybrid Energy Reactor with 233U Breeding Enhancement by Using Dual-Coolant System

Efficiency of Neutron Source in Fusion-Fission Hybrid Reactor

Conceptual design study on fusion-based hydrogen production reactor

Synchronized Fusion Development Considering Physics, Materials and Heat Transfer

Sustainable Development of China with Nuclear Energy System Beyond Generation-IV

Study of Thorium–uranium Based Molten Salt Blanket in a Fusion–fission Hybrid Reactor

Fusion/transmutation Reactor Studies Based on the Spherical Torus Concept

Assessment on Safety Characteristics of Fusion Nuclear Reactor

Neutronics Performance Of A Fusion-Fission Hybrid Reactor With Pressure Tube Assemblies

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Thermal-hydraulics Design and Analysis of Water-Cooled Energy Production Blanket for a Fusion-Fission Hybrid Reactor

Progress of the CFETR Design