Abstract:In this paper, dynamic modeling of a reconfigurable wheel-legged robot is proposed using a geometric constraint based on independent coordinates. The main contribution of this research is the use of a geometric constraint for the body's rotational angle and using the Gibbs–Appell method instead of traditional modeling approaches to avoid complex constraint equations, significant computational burden, and simulation time. This study necessitates some assumptions in order to develop constraint equations and calculate Gibbs functions due to the presence of nonholonomic constraints on the wheels and the requirement for the robot to move simultaneously in x- and z-directions to execute distinct tasks. With the proposed approach, dynamic equations are obtained without determining the Lagrangian coefficients. In addition, because of the particular form of the Gibbs equations, fewer partial derivatives are necessary to derive the equations from which the joints torques are calculated in terms of the quasi-coordinates. In addition to spatial vector relations, a geometric constraint is used to construct kinematic modeling, requiring other coordinates to be explicitly obtained in terms of quasi-coordinates in the dynamic formulation. Simulation results in various modes of motion to change the height of the robot while proceeding in its course and the associated motor torques, are verified experimentally using a WLRIUST robot. Finally, simulation results for several test scenarios are presented, demonstrating the overall performance of the robot with four double-link legs. Relevant simulation results are also compared to those obtained with the Adams software. The performance of the robot's movements and the torques applied to the motors by relevant changes in the quasi-coordinates are also examined. The results show MATLAB and Adams modeling differ nearly 1%, and with experimental tests differ about 5 to 10%.

Modeling and Constraints Analysis of Wheeled Mobile Robots

Modeling and Optimal Control of Omni-Directional Mobile Robots

Modeling And Control Of Wheeled Mobile Robot In Constrained Environment Based On Hybrid Control Framework

Enhanced Closed-Loop Systematic Kinematics Analysis of Wheeled Mobile Robots

A hierarchical constraint approach for dynamic modeling and trajectory tracking control of a mobile robot

Kinematics modeling and analysis for threewheel omnidirectional mobile robot

Kinematic model of wheeled mobile climbing welding robot

Using the Ackerman Principle for Kinematic Modeling of Wheeled Mobile Robots

Modeling and Finite-Time Tracking Control for Mobile Manipulators with Affine and Holonomic Constraints.

Analysis of Nonholonomic Constraints about a Variable Structure Bicycle Robot.

Dynamic modeling of a mobile humanoid robot

TRACKING CONTROL OF MOBILE ROBOTS WITH NONHOLONOMIC CONSTRAINT

Kinematic and dynamic analysis of a nonholonomic wheel-legged robot using Gibbs–Appell formulation

Kinematic Modeling, Analysis, and Verification of an Essboard-Like Robot

Dynamic Control and Analysis of a Nonholonomic Mobile Modular Robot

Modeling and Control of Wheeled Mobile Robot Based on Hybrid Automata

Kinematic Modeling of Mobile Robot with Steerable Wheels Based on Coordinate Transformation

Modelling and Control of Mobile Robots Based on Screw Theory

Modeling and Control of a Two-wheel Mobile Robot with Auxiliary Arms

Dynamic model and balance control of two-wheeled robot with non-holonomic constraints

Controlling an Underactuated Two-Wheeled Mobile Robot: A Constraint-Following Approach