Abstract:In this study, the influence of zinc oxide (ZnO) nanostructures with various morphologies on the performance of dye-sensitized solar cells (DSSCs) was investigated. Photo-electrodes were fabricated incorporating ZnO transport layers of distinct nanoscale morphologies—namely nanoparticles, microballs, spiky microballs, belts, and triangles—and their respective current–voltage characteristics were evaluated. It was observed that the DSSCs employing the triangular ZnO nanostructures, with a side length of approximately 30 nm, achieved the highest power conversion efficiency of 2.62%. This was closely followed by the DSSCs using spherical nanoparticles with an average diameter of approximately 20 nm, yielding an efficiency of 2.54%. In contrast, the efficiencies of DSSCs with microball and spiky microball ZnO nanostructures were significantly lower, measuring 0.31 and 1.79%, respectively. The reduction in efficiency for the microball-based DSSCs is attributed to the formation of micro-cracks within the thin film during the fabrication process. All DSSC configurations maintained a uniform active area of 4 mm2. Remarkably, the highest fill factor of 59.88% was recorded for DSSCs utilizing the triangular ZnO morphology, with the spherical nanoparticles attaining a marginally lower fill factor of 59.38%. This investigation corroborates the hypothesis that reduced particle size in the transport layer correlates with enhanced DSSC performance, which is further amplified when the nanoparticles possess pointed geometries that induce strong electric fields due to elevated charge concentrations.

The Influence of NaOH Concentration on the Performance of ZnO by a Hydrothermal Process

Effect of solution concentration on surface morphology, optical properties and solar light response of ZnO thin films

Effect of Reaction Temperature on Surface Morphology and Photoelectric Properties of ZnO Grown by Hydrothermal Method in Mixed Solvent

Effect of solution concentration on surface morphology and photocatalytic activity of ZnO thin films synthesized by hydrothermal methods

Influence of water content in mixed solvent on surface morphology, wettability, and photoconductivity of ZnO thin films.

Surface Morphology, Electrochemical and Electrical Performances of ZnO Thin Films Sensitized with Ag Nanoparticles by UV Irradiation

Effect of Solution Concentrations on Crystal Structure, Surface Topographies and Photoluminescence Properties of ZnO Thin Films

Effect of ammonia on morphology, wettability and photoresponse of ZnO nanorods grown by hydrothermal method

The improved photo-induced hydrophilicity of ZnO by adjusting the solution concentration

Enhanced Photocatalytic Performances of ZnO with Na Doping and Graphene Oxide Quantum Dots

Enhanced photo-induced hydrophilicity of the sol-gel-derived ZnO thin films by Na-doping

Hydrothermal Preparation and Characterization of ZnO with Various Morphologies for Dye-Sensitized Solar Cells

Effects of Electrodeposition Electrolyte Concentration on Microstructure, Optical Properties and Wettability of ZnO Nanorods

Preparation and Characterization of Na-doped ZnO Thin Films by Sol–gel Method

Investigation on the Photovoltaic Performance of ZnO Nanoarrays Prepared by Chemical Bath Deposition and Hydrothermal Method

Facile synthesis of ZnO micro-nanostructures with controllable morphology and their applications in dye-sensitized solar cells

Effect of alkali metal hydroxide on formation processes of zinc oxide crystallites from aqueous solutions containing Zn(OH)42? ions

Effect of Size and Morphology of Different ZnO Nanostructures on the Performance of Dye-Sensitized Solar Cells

Controllable Preparation of 2D and 3D ZnO Micro-Nanostructures and Their Photoelectric Conversion Efficiency

Effect of Temperature and Growth Time on Vertically Aligned ZnO Nanorods by Simplified Hydrothermal Technique for Photoelectrochemical Cells

Preparation, parameter optimization of anodized ZnO films and their photocatalytic performance in organic dye degradation in wastewater