Abstract:The main objective of this study was to determine the effect of filter pore size and fiber diameter on the performance of the baghouse filters for ultra-low emission. In this study, three kinds of conventional polyester filter (depth filtration media) and two kinds of polytetrafluoroethylene membrane-coated polyester filter (surface filtration media), having various filter pore sizes and fiber diameters, were tested to determine the performance of static and dynamic filtration. In order to determine the static filtration performance, the filtration resistance and the filtration efficiency of the clean filter media were measured by the arrestance method. The dynamic filtration performance experiments were conducted to determine the dynamic resistances, dust depositions, and dynamic filtration efficiencies of the dust-containing filter media under the condition of dust airflow filtration through a pulse-cleaning cycle. In the dynamic filtration performance experiments, the size of 50% test dust was less than 2.5 μm, and the mass mean aerodynamic diameter of the dust was 1.5 μm. The filtration velocity was 2 m∙min−1, and the dust concentration was 18.4 g∙m−3. The static filtration performance experiments showed that the filter pore size greatly affected the filtration resistance and the filtration efficiency of the fabric structure of the surface filtration media. In the depth filtration media, the filtration efficiency and the filtration resistance of the fabric structure were improved when the filter pore size and the fiber diameter were smaller in magnitude. For all the five filter media, smaller the pore size of the filter media, greater was the filtration precision (for fine particles, such as PM2.5) of the fabric structure. In the dynamic filtration performance experiments, the filter pore size and the fiber diameter of the depth filtration media affected the dynamic filtration resistance and the dynamic filtration efficiency of the depth filtration media by affecting the deposition rate of dust in the depth filtration media; however, the filter pore size of the surface filtration media affected the blocking rate of dust in the membrane micropores, thus influencing the dynamic filtration resistance and the dynamic filtration efficiency of the surface filtration media.

Experiment Investigation on Two Filter Medias for Air Filtration

The Performance Testing and Analysis of Common New Filter Materials: A Case of Four Filter Materials

Study on the Filtration Performance of the Baghouse Filters for Ultra-Low Emission as a Function of Filter Pore Size and Fiber Diameter

Experimental Study on Resistance Influencing Factors of Clean Filter Material Used in Air Purification

Characterization of glass fiber felt and its performance as an air filtration media

Filtration performance of glass fibrous air filter media under sinusoidal flow condition

Study on Filtration Performance of PVDF/PUL Composite Air Filtration Membrane Based on Far-Field Electrospinning

Experimental Study on Filter Performance of Automotive Air-conditioner

Research on the process of preparing fiber filtration membrane by centrifugal blowing electrospinning technology

Effect of main-stage filter media selection on the loading performance of a two-stage filtration system

Comparative Filtration Performance of Composite Air Filter Materials Synthesized Using Different Impregnated Porous Media

Research on the Advantages of Nanofibrous Air Filtration Membrane

Enhancement of Filtration Performance Characteristic of Glass Fiber-Based Filter Media, Part 2: Chemical Modification with Surface-Active Treatment

Effects of various humid environments on the filtration and dust cleaning performance of filter media

Preparation of combined oleophobic fibre filters with pore size gradients and their high-efficiency removal of oil mist droplets

Experimental investigation on filtration characteristic with different filter material of bag dust collector for dust removal

Multi-Scale Microstructure Investigation for a PM2.5 Air-Filter Efficiency Study of Non-Woven Polypropylene

Development of an asymmetric composite PPS-based bag-filter material through membrane laminating and superfine fiber blending: Lab test, field application and development of numerical models

Construction and Investigation of a Filtration Efficiency Test System for High-Efficiency Filter Materials Based on Mass Concentration

Improvement of Polytetrafluoroethylene Membrane High-Efficiency Particulate Air Filter Performance with Melt-Blown Media

Influence of pleat geometry on the filtration and cleaning characteristics of filter media