Abstract:Presently, wireless sensor notes (WSN) are widely investigated and used in condition monitoring on industrial process monitoring and control, based on their inherent advantages of lower maintenance cost, easy installation and the ability to be installed in places not reached easily. However, current WSN based monitoring system still need dedicated power line or regular charging / replacing the batteries, which not only makes it difficult to deploy it in the fields but also degrades the operational reliability. This PhD research focuses on an investigation into energy harvesting approaches for powering WSN so as to develop a cost-effective, easy installation and reliable wireless measurement system for monitoring mission critical machinery such as multistage gearbox. Among various emerging energy harvest approaches such as vibrations, inductions, solar panels, thermal energy harvesting is deemed in this thesis to be the most promising one as almost all machines have frictional losses which manifest in terms of temperature changes and more convenient for integration as the heat sources can be close to wireless nodes. In the meantime, temperature based monitoring is adopted as its changes can be more sensitive to early health conditions of a machine when its tribological behaviour is starting to be degraded. Moreover, it has much less data output and more suitable for WSN application compared the mainstream vibration based monitoring techniques. Based on these two fundamental hypothesis, the research has been carried out according to two main milestones: the development of a thermoelectric harvesting (TEH) module and the evaluation of temperature based monitoring performances based on an industrial gearbox system. The first one involves the designing, fabricating and optimising the thermal EH module along with a WSN based temperature node and the second investigates the analysis methods to detect the temperature changes due to various faults associated with tribological mechanisms in the gearbox. In completing the first milestone, it has successfully developed a TEH module using cost-effective thermoelectric generator (TEG) devices and temperature gradient enhancement modules (heat sinks). Especially, the parameters such as their sizes and integration boundary conditions have been configured optimally by a proposed procedure based on the fine element (FE) analysis and the heat generation characteristics of machines to be monitored. The developed TEG analytic models and, FE models along with simulation study show that three different specifications of heat sinks with a Peltier TEG module are able to produce power that are consistently about 85% of the experimental values from offline tests, showing the good accuracy in predicting power output based on different applications and thus the reliability of the models proposed. And further investigation shows that a Peltier TEG module based that the thermal energy harvesting system produces is nearly 10 mW electricity from the monitored gearbox. This power is demonstrated sufficient to drive the WSN temperature node fabricated with low power consumption BLE microcontroller CC2650 sensor tags for monitoring continuously the temperature changes of the gearbox. Moreover, it has developed model based monitoring using multiple temperature measurements. The monitoring system allows two common faults oil shortages and mechanical misalignment to be detected and diagnosed, which demonstrates the specified performance of the self-power wireless temperature system for the purpose of condition monitoring.

Thermoelectric Powered Autonomous Wireless Sensor Module for Temperature Monitoring

Touch-activated Information Interaction System Based on Body-Heat-powered Flexible Thermoelectric Generator for Food Spoilage Monitoring

Towards Batteryfree and Wireless Sensing for Personalized Ultraviolet Exposure Monitoring

THERMAL ENERGY HARVESTING IN WIRELESS SENSOR NODES USED FOR CONDITION MONITORING

Heat Exchanger Design for A Thermoelectric Module to Drive Wireless Sensors in Spindle Monitoring

High-efficient energy harvesting architecture for self-powered thermal-monitoring wireless sensor node based on a single thermoelectric generator

Research on the Performance of Thermoelectric Self−Powered Systems for Wireless Sensor Based on Industrial Waste Heat

A Self-Powered 3.26- $\mu {\text{W 70}}$ -m Wireless Temperature Sensor Node for Power Grid Monitoring

Bimetal-and-electret-based thermal energy harvesters - Application to a battery-free Wireless Sensor Node

Research on a Power Management System for Thermoelectric Generators to Drive Wireless Sensors on a Spindle Unit.

Efficient Self-Powered Convertor with Digitally Controlled Oscillator-Based Adaptive Maximum Power Point Tracking and RF Kick-Start for Ultralow-Voltage Thermoelectric Energy Harvesting

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

A Wireless Temperature Sensor Powered By A Piezoelectric Resonant Energy Harvesting System

Soil-Monitoring Sensor Powered by Temperature Difference between Air and Shallow Underground Soil

Energy Harvesting Chip and the Chip Based Power Supply Development for a Wireless Sensor Network

Combined energy supply and management of self-powered wireless sensors based on radioisotope thermoelectric generator for multiple scenarios

Passive Self‐Sustained Thermoelectric Devices Powering the 24 h Wireless Transmission via Radiation‐Cooling and Selective Photothermal Conversion

Multisource Energy Harvesting System for a Wireless Sensor Network Node in the Field Environment

Design of vibrating-powered wireless temperature sensing node for mine

An energy self-circulation system based on the wearable thermoelectric harvester for ART driver monitoring