Abstract:Through a tunnel-blasting project, the effect of tunnel-blasting vibration has been analyzed from the perspective of vibration energy transfer. The non-linear regression method was used to obtain the prediction equation for blast vibration velocity based on the field blast vibration data. Then, the maximum charge per delay of the blasting construction of the tunnel was obtained through the formula inversion. Based on the traditional Hilbert transform, a novel Hilbert–Huang transform (HHT) analysis method considering Complete Ensemble Empirical Mode Decomposition with Adaptive Noise decomposition (CEEMDAN) and wavelet packet threshold de-noising method has been proposed, the feasibility of which was verified using the field blast vibration signals. It has been proved that the improved HHT analysis method can be used to analyze the influence of the different blasting vibration parameters on the regular distribution of vibration energy. In addition, the dimensional analysis method was used to establish the blasting vibration energy prediction model. The results of this research show that the improved HHT analysis method can solve the problem of modal aliasing caused by the traditional decomposition method, and can obtain the purified main modal components, which improves the adaptability of HHT analysis. In addition, with the increase of the distance between blast area and the maximum charge per delay, the high-frequency energy of the blasting signal gradually weakens, while the dominant energy frequency band diverts to the low-frequency band. The methods and conclusions of this research can provide a certain reference for the controlled blasting construction in similar cases.

Research on Blasting Vibration Signal Denoising Based on Lifting Scheme

A Method for Blasting Vibration Signal Denoising Based on Ensemble Empirical Mode Decomposition-Wavelet Threshold

Improving Purity of Blasting Vibration Signals Using Advanced Empirical Mode Decomposition and Wavelet Packet Technique

Research on Blasting Vibration Signal Denoising Method in Freezing Vertical Shaft

LW Algorithm in the Application Research of Digital Blasting Vibration Signal Compression

Seismic Signal Denoising Via A Lifting Scheme Based Wavelet Packet Transform

Wavelet De-Noising Method of Blasting Vibration Signal Considering Different Level Noise

Study on Denoising Method of Vibration Signal Induced by Tunnel Portal Blasting Based on WOA-VMD Algorithm

Noise suppression of seismic signal through lifting wavelet analysis

Denoising method of vibration signal of roadheader based on the optimal wavelet basis selection

Trend Removing Methods of Vibration Signals of Deep Hole Bench Blasting in Near Field

Blasting Vibration Parameters Using Comprehensive Regression Of Wavelet Denoising And Particle Swarm Optimization Algorithm

Wavelet Transform-based Denoising Approach and Its Application

Filtering and Denoising of Rock Blasting Vibration Signal with EMD

Research of Acoustic Emission Signal De-Noising Based on Lifting Wavelet Packet

Application of EEMD in Blasting Vibration Signal De-noising

Research on vibration effect of tunnel blasting based on an improved Hilbert–Huang transform

Application of an Improved Wavelet Threshold Denoising Method for Vibration Signal Processing

Application of Wavelet Denoising on Hoist Load

Noise Smoothing For Structural Vibration Test Signals Using An Improved Wavelet Thresholding Technique

The Signal Denoising Algorithm Based on Optimization Wavelet Packet and Its Application