Abstract:For the purpose of studying the dynamic properties of lightweight aggregate concrete, dynamic performance tests under uniaxial compression were conducted by considering 10 different strain rates ranging from 10−5/s to 10−1/s, from which the stress-strain curves under various compressive loads were obtained. From the stress-strain curves, parameters including peak stress, peak strain, and elastic modulus of lightweight aggregate concrete, as well as the concrete failure mode, were determined and examined. By reviewing the relevant literature on ordinary concrete, the dynamic properties of lightweight aggregate concrete were analyzed accordingly. Meanwhile, by applying the dynamic elastoplastic damage constitutive model, the effect of dynamic rate on lightweight aggregate concrete was calculated. The experimental results showed that the damage mode of lightweight aggregate concrete under the static and dynamic strain rates belonged to shear failure, which is different from that of ordinary concrete (binding material failure). On the other hand, it was also found that the peak stress and elastic modulus of lightweight aggregate concrete could be increased by 54.48% and 28.75%, respectively, with the increase of strain rate, suggesting that the loading strain rate has a stronger influence on lightweight aggregate concrete than on ordinary concrete. Based on the experimental data, both the peak stress and nondimensionalized elastic modulus are in linear relationship with the logarithm of the nondimensionalized strain rate. Moreover, the established constitutive model had been verified as an effective and reliable tool for simulating the dynamic rate effect of lightweight aggregate concrete.

Dynamic Compressive Test and Rate-Dependent Constitutive Model of Microconcrete

Experimental Study on the Dynamic Compressive Properties of Concrete and the Application Analysis

Experimental study on dynamic compressive properties of concrete

Experimental study on the mechanical property of microconcrete in model test

Experimental Research of Strain Rate on Compressive Property Effects of Concrete

Dynamic Behaviour and Constitutive Model of Concrete at Different Strain Rates

Numerical Simulation of Dynamic Mechanical Properties of Concrete under Uniaxial Compression

Investigation into Dynamic Properties of Damaged Plasticity Model for Concrete in ABAQUS

A Microscopic Approach to Rate Effect on Compressive Strength of Concrete

Study on Dynamic Properties of Plain Concrete under Uniaxial Compression and Its Constitutive Relation

Dynamic test and constitutive model for reinforcing steel

Mesoscopic Study of the Dynamic Behaviours of High-Strength Concrete

Dynamic Properties Test and Constitutive Relation Study of Lightweight Aggregate Concrete under Uniaxial Compression

Meso-simulation on dynamic biaxial compressive strength criterion of concrete

Mesoscopic simulation of the dynamic tensile behaviour of concrete based on a rate-dependent cohesive model

Study Of Dynamic Compressive Properties Of Concrete

Experimental and Numerical Investigations on Seismic Responses of Reinforced Concrete Structures Considering Strain Rate Effect

An Experimental Study of Dynamic Compression Performance of Self-Compacting Concrete

Experimental Study on Dynamic Constitutive Model of Concrete under Impact Loading

Monte Carlo Simulations of Meso-Scale Dynamic Compressive Behavior of Concrete Based on X-ray Computed Tomography Images

Numerical Study on Dynamic Properties of Concrete