Abstract:To further improve the performance of dielectric elastomer actuaotrs (DEAs), the development of novel elastomers with enhanced electro-mechanical properties is focal for the advancement of the technology. Hence, reliable techniques to assess their electro-mechanical performance are necessary. Characterization of the actuator materials is often achieved by fabricating circular DEAs with the pre-stretch of the membrane fixed by a stiff frame. Because of this set-up, the electrode size relative to the carrier frame's dimension has an impact on actuator strain and displacement. To allow for comparable results across different studies, the influence of this effect needs to be quantified and taken into account. This paper presents an in-depth study of the active-to-passive ratio by proposing two simplified analytical models for circular DEA and comparing them. The first model is taking the hyperelastic material properties of the dielectric film into account while the second model is a linear elastic lumped parameter model based on the electro-mechanical analogy. Both models lie in good agreement and show a significant linear impact of the radial active-to-passive ratio on the electro-active strain and a resulting maximum of displacement around 50% radial coverage ratio. These findings are validated by experiments with actuators fabricated using silicone membranes. It is shown that the electrode size is not only an important parameter in the experimental design, but in some cases of higher significance for the accuracy of analytical models than the hyperelastic properties of the material. Furthermore, it could be shown that a radial coverage ratio of around 50% is desirable when measuring displacement as it maximizes the displacement and lowers the impact of deviations in electrode sizes due to fabrication errors.

Modeling and Actuation Performance Analysis of Conically-Shaped Dielectric Electroactive Polymer Actuator

Modelling and Control of a Dielectric Elastomer Actuator

The Behavior of Dielectric Elastomer Actuators Connected in Series and Parallel

Novel Arrangements For High Performance And Durable Dielectric Elastomer Actuation

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Electromechanical characteristic analysis of a dielectric electroactive polymer (DEAP) actuator

Electromechanical Analysis and Simplified Modeling of Dielectric Elastomer Multilayer Bending Actuator

Mechanisms of large actuation strain in dielectric elastomers

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

Durable Dielectric Elastomer Actuation

Spatially Modulus-Patterned dielectric elastomer actuators with oriented electroactuation

Dynamic modeling of dielectric elastomer actuator with conical shape

Electromechanical Model-Based Adaptive Control of Multilayered Dielectric Elastomer Bending Actuator

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

Electromechanical Behavior Of Fiber-Reinforced Dielectric Elastomer Membrane

Design Analysis and Actuation Performance of a Push-Pull Dielectric Elastomer Actuator

Influence of Active-to-Passive Ratio on the Deformation in Circular Dielectric Elastomer Actuators

Performance Improvement of Planar Dielectric Elastomer Actuators by Magnetic Modulating Mechanism

Electrostatic Field Induced Coupling Actuation Mechanism for Dielectric Elastomer Actuators

Mechanics of Dielectric Elastomers: Materials, Structures, and Devices