Abstract:Multi-laser stitching additive manufacturing technology is an effective solution to break through the size limitation in single-laser additive manufacturing based on a powder-bed process, where excellent metallurgical bonding and high surface quality of the multi-laser stitching region (overlap) are the critical issues to ensure the final forming quality. The above metallurgical bonding and surface quality are not only affected by common process parameters but also sensitive to laser delay (including on and off delay) parameters because they influenced the starting and end regions of melt tracks. In this study, the influence of laser delay parameters on the forming quality of a single 316L stainless steel melt track was first investigated, thereby obtaining an optimization range of laser delay parameters. Then, the influence mechanism of laser delay on the internal pore defects and surface quality in the dual-laser stitching region was systematically studied. The results show that with the increase of laser on delay, there are four kinds of internal defects in the stitched region, namely keyhole, irregular pore, large-size continuous pore and non-overlap. In addition, due to the high energy density at the starting/end point of the melt tracks, powder denudation and solidified bulge were observed near the stitching line, which leads to the undulation problem with layer-by-layer accumulation on the surface in the stitching region. It is found that the surface undulation with a height of 202 μm and a width of 723 μm still exists at the optimized laser delay parameters (porosity of 0.96 %), which means new process strategies are also needed to be developed besides optimization of laser on/off delay parameters. In addition, a trade-off should be made between the low porosity and high surface quality due to the different influence trends of laser delay on them. This study provides a theoretical basis and technical support for reducing internal defects and improving surface quality in the stitching region fabricated by multi-laser selective laser melting (SLM).

Detection Of Laser Melting Bionic Stripe Quality On Mould Surface Based On Acoustic Signal

Detecting features of defect metal based on laser ultrasonic technique

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Laser-induced thermal damage detection in metallic materials via acoustic emission and ensemble empirical mode decomposition

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

Back to Michelson Interferometer: a Precise Inspection System for Industrial Intricate Structures Defect Detection

HHT analysis of acoustic signal characteristics caused by defocusing amount fluctuation on laser strengthened mould surface

Laser Bionic Strengthening Local Grid of Mould Surface

Laser ultrasonic detection for defects of LAM components based on variable time window intensity mapping with adaptive 2σ thresholds

Intra-layer and inter-layer monitoring of laser powder bed fusion defects based on airborne acoustic and gn-Res model: pore and deformation

Direct mechanistic connection between acoustic signals and melt pool morphology during laser powder bed fusion

Defect detection in selective laser melting technology by acoustic signals with deep belief networks

Influence mechanism of laser delay on internal defect and surface quality in stitching region of 316L stainless steel fabricated by dual-laser selective laser melting

In-situ crack and keyhole pore detection in laser directed energy deposition through acoustic signal and deep learning

Inference of highly time-resolved melt pool visual characteristics and spatially-dependent lack-of-fusion defects in laser powder bed fusion using acoustic and thermal emission data

Laser Polishing and Annealing Injection Mold Using Dual-Beam Laser System

Nondestructive detection of laser-cladding coating interface defects: a deep learning-enhanced laser ultrasonics approach

A feature-level multi-sensor fusion approach for in-situ quality monitoring of selective laser melting

Influence of surface roughness on laser ultrasonic detection for laser powder bed fusion manufactured 316L stainless steel