Abstract:In view of the potential demand for the materials with excellent dynamic mechanical behavior in protective construction, the dynamic tensile mechanical properities and deformation mechanism of twinning-induced plasticity (TWIP) steel at various high strain rates were investigated in this paper by combining test research and numerical simulation. In order to explore the impact of strain rates on mechanical behaviors within the tested range, a split Hopkinson tensile bar (SHTB) was utilized to measure the mechanical responses of TWIP steel ranging from 1000 s -1 to 6500 s -1 . The Johnson-Cook (J-C) dynamic constitutive model was established based on the mechanical test results, and the mechanical properties were studied by using ANSYS/LS-DYNA. EBSD and TEM were employed to investigate the microstructure evolution of TWIP steel under dynamic loading. The results demonstrate that both strength and plasticity increase with increasing strain rate, demonstrating positive strain rate sensitivity (PSRS) which is primarily due to the activation of multiple twin systems at higher strain rates. As the strain rate increases, the mean free path of dislocation slip reduces, causing a higher strain hardening rate. The critical shear stress required for twinning is almost unchanged with an increase in strain rate, while the shear stress required for dislocation increases consistently. As the strain rate exceeds 3000 s -1 , the critical shear stress required for dislocation becomes greater than that for twinning. With increasing strain rate, the proportion of secondary twins in TWIP steel rises and the deformation twins are bent when the strain rate is 6500 s -1 owing to the effect of dislocations and stacking faults. The production of nanoscale twins at higher strain rates is a beneficial phenomenon, as it enhances both strength and plasticity. The deformation twins become thinner with an increase in strain rate, leading to a rise in the stress needed for the motion of dislocations to pass the twins, which contributes to the improvement of strength in TWIP steel. The slip systems that deforms at a disadvange have new orientations because of defromation twins. The established J-C model is appropriate well for analyzing the mechanical properties of TWIP steel in the tested range of strain rates accoring to the fingdings of test and numerical simulation. Establishing the connection of microstructure and macroscopic behavior of TWIP steel could provide a guidance for the its further study and the application in the fields of impact resistance and anti-explosion.

Dynamic Tensile Behaviour and Full Field Strain Measurement of High Strength Steel

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

Tensile Mechanical Behaviour of Ultra-High Strength Cold Rolled Dual Phase Steel DP1000 at High Strain Rates

Dynamic Tensile Testing of Based and Welded Automotive Steel

Identification of Dynamic Constitutive Parameters of a High-Strength Steel and Numerical Simulation

Tensile performance of normal and high-strength structural steels at high strain rates

Application of 3D digital image correlation for the measurement of the tensile mechanical properties of high-strength steel

Study on Dynamic Mechanical Performance and Fracture Behaviors of High Strength Steel

High strain rate experiments and constitutive model for Q390D steel

Dynamic tensile behavior and constitutive model of a novel high-strength and high-toughness plate steel

Study on dynamic mechanical behavior of Q460JSC and HQ600 high strength steel

Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels

Dynamic deformation behavior and corresponding constitutive model of ultra-high strength DP1000 steel

Effect of Loading Rate on Tensile Properties of Automotive Steel Sheet

Research on the Dynamic Deformation Behavior of the DP780 Advanced High Strength Steel

Dynamic Mechanical Behavior and Constitutive Models of S890 High-Strength Steel at Intermediate and High Strain Rates

A study of localisation in dual-phase high-strength steels under dynamic loading using digital image correlation and FE analysis

Research on dynamic deformation behavior and constitutive relationship of hot forming high strength steel

Dynamic tensile behavior of S690 high-strength structural steel at intermediate strain rates

Investigation of dynamic tensile mechanical responses and deformation mechanism at high strain rates in a TWIP steel

Dynamic tensile behaviour of TWIP steel under intermediate strain rate loading