Abstract:Full tensile structures (such as cable domes, cable networks and cable trusses) are structures that only consist of cables and struts.There are three steps in its onsite construction: (1) assembly and connection, (2) towing and lifting and (3) tensioning and shaping.During construction process, the structure may suffer from large mechanism displacement and cable slack, so its initial shape was far from equilibrium.The form-finding analysis is a major difficulty in the construction process analysis.In this paper, we propose a new method for static equilibrium form-finding analysis of a cable-strut system based on a nonlinear dynamic finite element method and introduce virtual inertia and viscous damping force, as well as a series analysis techniques and a multi-step continuous solver.When the total system kinetic energy reaches its peak, the finite element model is updated, and the dynamic equilibria gradually converge to a static equilibrium state through iterative updating.To improve the analysis efficiency, stability and accuracy, key technical measures are proposed for time-step lengths, total energy peak value, model updating, convergence criteria and static equilibrium verification.In the case of the rigid cable dome in Wuxi New District Science and Technology Exchange Centre in China, we used this method to perform the mechanical analysis during the integral tow-lifting and tensioning process, and the project corresponded with our analysis.Meanwhile, we have to mention that during the construction process of integral tow-lifting, an inflection point exists in the adjustment phase, at which point the configuration stability is the worst and struts can fall sideways.Especially, for cable domes with a high rise-span ratio, the stability at the inflection point needs to be addressed.

Statics and Grasp Stiffness Analysis of an Underactuated Cable-Truss Mechanism

Research on simultaneous control of force and shape for adaptive cable-strut tensile structures

Static Behavior of Large-Span Annular Cable Truss Structures

The Design and Kinematics Analysis of an Underactuated Cable-Truss Mechanism

RESEARCH ON MECHANICAL PROPERTIES OF CABLE-STRENGTHENED SCISSOR-HINGE MECHANISM

Dynamics Analysis and Experiments of an Underactuated Cable-Truss Mechanism

Shape and Force Control of Prestressed Cable-Strut Structures Based on Nonlinear Force Method

Self-Equilibrium, Mechanism Stiffness, and Self-Stress Design of General Tensegrity with Rigid Bodies or Supports: A Unified Analysis Approach

Experiment on cable tension and adjustment of truss string structure

Kinematic Analysis of the Deployable Truss Structures for Space Applications

Structural Design and Static Analysis of a Cable-Driven Underactuated Manipulator with Locking Devices

Self-adaptive Grasp Analysis of a Novel Under-Actuated Cable-Truss Robotic Finger

Stiffness Analysis of Parallel Cable-Driven Upper Limb Rehabilitation Robot

Static Analysis of Cable-Driven Manipulators with Non-Negligible Cable Mass

Morphological analysis of cable-strut tension structures with strength optimization using principle of virtual work

Study on Stiffness-Oriented Cable Tension Distribution for a Symmetrical Cable-Driven Mechanism

Research on Controllable Stiffness of Redundant Cable-Driven Parallel Robots

STATIC EQUILIBRIUM FORM-FINDING ANALYSIS OF CABLE-STRUT SYSTEM BASED ON NONLINEAR DYNAMIC FINITE ELEMENT METHOD

Stiffness Modeling and Dynamics Co-Modeling for Space Cable-Driven Linkage Continuous Manipulators

Statics and dynamics of pulley-driven tensegrity structures with sliding cable modeling

Coupled Bending Inwards Motion and Control Strategy Analysis of a Cable-Driven Underactuated Finger.