Abstract:The variation of physical and mechanical properties of the lightweight bulk filling material with cement and expanded polystyrene (EPS) beads contents under different confining pressures is important to construction and geotechnical applications. In this study, a lightweight bulk filling material was firstly fabricated with Singapore marine clay, ordinary Portland cement and EPS. Then, the influences of EPS beads content, cement content, curing time and confining pressure on the mass density, stress–strain behavior and compressive strength of this lightweight bulk filling material were investigated by unconsolidated and undrained (UU) triaxial tests. In these tests, the mass ratios of EPS beads to dry clay (E/S) were 0%, 0.5%, 1%, 2%, and 4% and the mass ratios of cement to dry clay (C/S) were 10% and 15%. Thirdly, a series of UU triaxial tests were performed at a confining pressure of 0 kPa, 50 kPa, 100 kPa, and 150 kPa after three curing days, seven curing days, and 28 curing days. The results show that the mass density of this lightweight bulk filling material was mainly controlled by the E/S ratio. Its mass density decreased by 55.6% for the C/S ratio 10% and 54.9% for the C/S ratio 15% when the E/S ratio increased from 0% to 4% after three curing days. Shear failure more easily occurred in the specimens with higher cement content and lower confining pressure. The relationships between compressive strength and mass density or failure strain could be quantified by the power function. Increasing cement content and reducing EPS beads content will increase mass density and compressive strength of this lightweight bulk filling material. The compressive strength with curing time can be expressed by a logarithmic function with fitting correlation coefficient ranging from 0.83 to 0.97 for five confining pressures. These empirical formulae will be useful for the estimation of physical and mechanical properties of lightweight concretes in engineering application.

Experimental study of the influence of EPS particle size on the mechanical properties of EPS lightweight concrete

Compressive Behavior of Lightweight Concrete Using Aerogel-Reinforced Expanded Polystyrene Foams

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Dynamic impact compressive performance of expanded polystyrene (EPS)-foamed concrete

Effects of Particle Distribution on the Mechanical Properties of Expanded Polystyrene Sphere-Concrete Mixes

Experimental Scrutiny of Uniaxial Compressive Stress–Strain Relationship for Expanded Polystyrene Concrete

A novel lightweight concrete-fabrication and its thermal and mechanical properties

Mechanical Properties of Eps Lightweight Concrete

Experimental Study of Lightweight Expanded Polystyrene Aggregate Concrete Containing Silica Fume and Polypropylene Fibers

Dynamic Mechanical Behavior of EPS Concrete

Study on the Properties of Lightweight Expanded Polystyrene Concrete

Dynamic properties of low-density expandable polystyrene concrete materials

Properties of Lightweight Expanded Polystyrene Concrete Reinforced with Steel Fiber

Fabrication and Compressive Properties of Expanded Polystyrene Foamed Concrete: Experimental Research and Modeling

Experimental Study on the Deformation Properties of Lightweight Soil Using Recycled Sludge and EPS Particles

A study on the e ﬀ ect of microspheres on the freeze – thaw resistance of EPS concrete

A study on the effect of microspheres on the freeze–thaw resistance of EPS concrete

Physical and Mechanical Properties of a Bulk Lightweight Concrete with Expanded Polystyrene (EPS) Beads and Soft Marine Clay

Properties of lightweight concrete composed of magnesia phosphate cement and expanded polystyrene aggregates

A Novel Hydrophilic Modification Method of EPS Particles: Conception Design and Performances in Concrete

Methods available for improving and evaluating the workability of EPS lightweight concrete