Abstract:This paper addresses the measurement and modelling of the damaged properties of asphalt mixtures including the fracture, healing and viscoplastic deformation of the asphalt mixtures in both tensile and compressive loading as being affected by their composition and conditioning with ageing and exposure to temperature and moisture. An energy-based mechanics is applied to obtain the material fundamental properties such as surface energies, bond energies, anisotropy, yield functions and plastic potential functions that are valid for actual asphalt mixtures, viscoelastic crack growth criteria under both tensile and compressive loading, a simple mechanics-based method of determining the fatigue endurance limit, and the measurement and prediction of healing in restoring the damage done by fracture. Healing is anti-fracture and cracking is the net result of the interplay of these two complimentary mechanisms. Because fracture in asphalt mixtures is not the growth of a single crack but the simultaneous growth of multiple cracks that start out as air voids, this fact leads to the use of the growth of damage density to characterise fracture in an asphalt mixture. It was discovered that the form of Paris' law applies to the growth of damage density of asphalt mixtures in both tensile and compressive loadings. The importance of this fact lies in many developments from this discovery, e.g. compressive monotonic loading of cylindrical test samples permits a direct determination of the Paris' Law coefficient and exponent. In all cases, measured material properties are presented as they vary with mixture composition and with conditioning such as moisture and ageing, both in the lab and in the field. The measurements of these properties are made simply, quickly and accurately by the use of mechanics so that an entire characterisation of the properties of an asphalt mixture in tension and compression can be completed in the space of one day. The net effect is to reduce the efforts expended in the lab and the systematic error due to the assumptions made by the existing models and simultaneously to increase the efficiency and cost-effectiveness of materials testing and raise the reliability of the design of mixtures, pavement structures and specifications and the prediction of the life cycles in as-built pavements.

Three-Dimensional Heterogeneous Fracture Simulation of Asphalt Mixture under Uniaxial Tension with Cohesive Crack Model

Three-dimensional Modeling and Simulation of Asphalt Concrete Mixtures Based on X-ray CT Microstructure Images

2D and 3d Fracture Modeling of Asphalt Mixture with Randomly Distributed Aggregates and Embedded Cohesive Cracks

Cohesive Cracking Simulation of Asphalt Mixture with Reflective Crack Through Xfem

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Energy-Based Mechanistic Approach to Characterize Crack Growth of Asphalt Mixtures

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Characteristics of Damaged Asphalt Mixtures in Tension and Compression

Pseudo Energy-Based Crack Initiation Criterion for Asphalt-Filler Composite System under a Fatigue Shear Load

Energy-Based Kinetics Approach for Coupled Viscoplasticity and Viscofracture of Asphalt Mixtures

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Micromechanics Modeling of Viscoelastic Asphalt-Filler Composite System with and Without Fatigue Cracks

Characteristics of Undamaged Asphalt Mixtures in Tension and Compression

A Research on Fatigue Damage Constitutive Equation of Asphalt Mixture

Crack Initiation in Asphalt Mixtures under External Compressive Loads

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

THREE-DIMENSIONAL MESO-SCALE COHESIVE FRACTURE MODELING OF CONCRETE USING A PYTHON SCRIPT IN ABAQUS

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Numerical Simulation of Crack Propagation in Flexible Asphalt Pavements Based on Cohesive Zone Model Developed from Asphalt Mixtures

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials