Abstract:In order to improve the mechanical properties and durability of lightweight aggregate concrete in extreme environments, this study utilized Inner Mongolia pumice as the coarse aggregate to formulate pumice lightweight aggregate concrete (P-LWAC) with a silica powder content of 0%, 2%, 4%, 6%, 8%, and 10%. Under sulfate dry–wet cycling conditions, this study mainly conducted a mass loss rate test, compressive strength test, NMR test, and SEM test to investigate the improvement effect of silica powder content on the corrosion resistance performance of P-LWAC. In addition, using grey prediction theory, the relationship between pore characteristic parameters and compressive strength was elucidated, and a grey prediction model GM (1,3) was established to predict the compressive strength of P-LWAC after cycling. Research indicates that under sulfate corrosion conditions, as the cycle times and silica powder content increased, the corrosion resistance of P-LWAC showed a trend of first increasing and then decreasing. At 60 cycles, P-LWAC with a content of 6% exhibited the lowest mass loss rate and the highest relative dynamic elastic modulus, compressive strength, and corrosion resistance coefficient. From the perspective of data distribution, various durability indicators showed a clear mirror symmetry towards both sides with a silica powder content of 6% as the symmetrical center. The addition of silica fume reduced the porosity and permeability of P-LWAC, enhanced the saturation degree of bound fluid, and facilitated internal structural development from harmful pores towards less harmful and harmless pores, a feature most prominent at the 6% silica fume mixing ratio. In addition, a bound fluid saturation and pore size of 0.02~0.05 μm/% exerted the most significant influence on the compressive strength of P-LWAC subjected to 90 dry–wet cycles. Based on these two factors, grey prediction model GM (1,3) was established. This model can accurately evaluate the durability of P-LWAC, improving the efficiency of curing decision-making and construction of concrete materials.

Durability against wetting–drying cycles of sustainable Lightweight Cellular Cemented construction material comprising clay and fly ash wastes

Mechanical and Durability Properties of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregate and Fly Ash, Slag and Silica Fume

Engineering Properties of Lightweight Cellular Cemented Clay−fly Ash Material

The Durability of Mortar Containing Alkali Activated Fly Ash-Based Lightweight Aggregate

Factors Influencing Unit Weight and Strength of Lightweight Cemented Clay

Durability Properties of Lightweight Foamed Concrete Reinforced With ‘Musa Acuminate’ Fibre

Performance of polypropylene fiber-reinforced cellular lightweight fly ash geopolymer mortar under wet and dry cycles

Engineered cementitious composites using blended limestone calcined clay and fly ash: Mechanical properties and drying shrinkage modeling

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Strength and Durability Characteristics of Cement and Class F Fly Ash-Treated Black Cotton Soil

Hydration and durability of low-heat cementitious composites for dam concrete: Thermodynamic modeling and experiments

Strengthening mechanism of lightweight cellular concrete filled with fly ash

Characteristics of Lightweight Concrete Fabricated with Different Types of Strengthened Lightweight Aggregates

Characterization and Resistance Against the Combined Effect of Chloride Erosion and Freeze–thaw Cycling of Sticky Rice Lime Paste Enhanced by Cellulose Fiber and Fly Ash

Under Sulfate Dry–Wet Cycling: Exploring the Symmetry of the Mechanical Performance Trend and Grey Prediction of Lightweight Aggregate Concrete with Silica Powder Content

Durability Properties of Lightweight Foamed Concrete Reinforced with Lignocellulosic Fibers

Influence of Fly Ash Content on the Durability of Mortar Specimens under Dry/Wet Sulfate Attack

Research on the Water Absorption and Release Characteristics of a Carbonized γ-C2S Lightweight Aggregate in Lightweight and High-Strength Concrete

Effects of Fly Ash on Mechanical and Physical Properties of Earth-Based Construction

Investigation of Low-Calcium Circulating Fluidized Bed Fly Ash on the Mechanical Strength and Microstructure of Cement-Based Material

LC50 fly ash microbead lightweight high-strength concrete: mix ratio design, stress mechanism, and life cycle assessment