Abstract:As the temperature of hot spots increases in electronic devices, thermal management is a key issue for maintaining a device's reliability and performance. The usual approaches of quickly extracting the heat from the hot spots have focused on aligning two-dimensional filler along the in-plane orientation in the polymer matrix. Meanwhile, improving the through-plane thermal conductivity of polymer-based composites is as important as in-plane thermal conductivity. In this study, poly(vinylidene fluoride) composites with three-dimensional continuous thermal conductive pathways of a low melting point alloy (LMPA)/graphene were prepared through a two-step method. Poly(vinylidene fluoride)@graphene (PVDF@Gr) microspheres were firstly prepared by an in-situ water-vapor induced phase separation method. Subsequently, PVDF@Gr/LMPA composites were obtained by hot-pressing after mixing the LMPA with the PVDF@Gr microspheres. Attributed to the unique solid-liquid phase transition advantage of the LMPA and the good matching of the phonon power spectrum between the LMPA and the graphene, the PVDF@4.8Gr/10LMPA composites with 4.8 vol% graphene and 10.0 vol% LMPA exhibited an outstanding in-plane thermal conductivity of 9.41 W m−1 K−1 and through-plane thermal conductivity of 0.35 W m−1 K−1, which was nearly increased by 245% and 130% compared to that of the PVDF@4.8Gr composites, respectively. The enhanced elasticity modulus and reduced thermal expansion coefficient were attributed to the LMPA constructing a three-dimensional continuous thermal conductive pathway along with the graphene and reducing interface thermal resistance. This study offeres a straightforward and repeatable method for fabricating highly thermally conductive polymer composites and widens the application of LMPAs in the fields of thermal management.

Conductive composites with segregated structure and ultralow percolation threshold via flocculation-assembled PVDF/graphene core–shell particles

An Electrically Conducting Polymer/graphene Composite with a Very Low Percolation Threshold

An Effective Strategy to Achieve Ultralow Electrical Percolation Threshold with CNTs Anchoring at the Interface of PVDF/PS Bi‐Continuous Structures to Form an Interfacial Conductive Layer

Ultralow electrical percolation in melt-compounded polymer composites based on chemically expanded graphite

Composite nanoarchitectonics of poly(vinylidene fluoride)/graphene for thermal and electrical conductivity enhancement via constructing segregated network structure

Unsaturated polyester resin/graphite nanosheet conducting composites with a low percolation threshold

Fabrication and Dielectric Properties of Oriented Polyvinylidene Fluoride Nanocomposites Incorporated with Graphene Nanosheets

Few-layer graphene sheets/poly(vinylidene fluoride) composites prepared by a water vapor induced phase separation method

Ultralow Electrical Percolation in Graphene Aerogel/Epoxy Composites

Low Percolation Threshold and Balanced Electrical and Mechanical Performances in Polypropylene/carbon Black Composites with a Continuous Segregated Structure

Electrical conductivity of poly(vinylidene fluoride)/carbon nanotube composites with a spherical substructure

Significant Ultra-low Percolation Threshold, Enhanced Positive Temperature Coefficient Effect and Dielectric Permittivity in Polymer-based Composites with Immiscible Polymers

CNTs/ UHMWPE Composites with a Two-Dimensional Conductive Network

Nanocomposites of Poly(vinylidene Fluoride) - Controllable Hydroxylated/carboxylated Graphene with Enhanced Dielectric Performance for Large Energy Density Capacitor

Low percolation threshold polyvinylidene fluoride/multi‐walled carbon nanotube composites: A perspective of electrical conductivity, crystalline, rheological and mechanical properties

Preparation of Binary Conductive Polymer Composites with Very Low Percolation Threshold by Latex Blending

Construction of low melting point alloy/graphene three-dimensional continuous thermal conductive pathway for improving in-plane and through-plane thermal conductivity of poly(vinylidene fluoride) composites

Fabrication and Electrical Properties of Cnt/Pp Conductive Composites with Low Percolation Threshold by Solid State Alloying

A facile melt coating approach to fabricate macroscopic segregated polymer/carbon nanotube conductive composites with balanced properties

Fabrication and Characterization of PEG@graphene/PVDF Nanocomposite with High Permittivity and Low Loss

Preparation of conductive polylactic acid/high density polyethylene/carbon black composites with low percolation threshold by locating the carbon black at the Interface of co‐continuous blends