Abstract:Three 2,1,3-benzothiadiazole-based conjugated copolymers named PBDT-0F-BTs, PBDT-2F-BTs and PBDT-6F-FBTs, which were derived from 4,8-bis(4,5-dioctylthiophen-2-yl)benzo[1,2-b:4,5-b′]dithiophene and (3,4'-bis(2-hexyl- decyl)-2,2'-dithiophene-5-yl) substituted 2,1,3-benzothiadiazole and/or 5,6-difluoro- 2,1,3-benzothiadiazole derivatives with 2,2′-dithiophene and/or 3,3′-difluoro- 2,2′-dithiophene as π-linkers, were prepared and characterized. The copolymers PBDT-0F-BTs, PBDT-2F-BTs and PBDT-6F-FBTs exhibited the highest occupied molecular orbital (HOMO) and lowest unoccupied orbital (LUMO) energy levels of −5.38 eV/−3.57 eV, −5.45 eV/−3.65 eV and −5.55 eV/−3.78 eV, with the light response from 300 nm to 720∼750 nm, alongside with the similar aggregation, except that the charge transporting mobilities were successively increased, and the dielectric constants were gradually improved from 3.3 to 4.8 to 5.9 at 1 KHz, while the fluorine atoms in the each repeat unit of polymers were varied from 0 to 2 and then up to 6, respectively. Beyond that, it has also been found that the power conversion efficiencies and exciton dissociation probability (P(E,T)) of the bulk heterojunction organic photovoltaic cells (BHJ-OPVs) from the blend films of polymers paired with Y6 (2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl12,13-dihydro[<a class="workspace-trigger" href="#bib1">1</a>,<a class="workspace-trigger" href="#bib2">2</a>,<a class="workspace-trigger" href="#bib5">5</a>]thia-diazolo[3,4-e]thieno[2'',3'':4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-ind-ene-2,1-diylidene))dimalononitrile), were varied from 7.83% and 85.9%, to 9.22% and 90.2% and then up to 12.34% and 91.4%. The results indicated that the continuous insertion of the fluorine atoms into the repeat units of the conjugated polymers would result in the consecutively deepening the HOMO energy levels, increase dielectric constants and charge mobilities, thus devote to the enhancement of the P(E,T) and the performance of the BHJ-OPVs.

Effects of Bridge Units on the Properties of Indolo[3,2-B]carbazole-co-difluorobenzo[d][1,2,3]triazole Based Π-Conjugated Copolymers

Tailoring Regioisomeric Structures of Π-Conjugated Polymers Containing Monofluorinated Π-Bridges for Highly Efficient Polymer Solar Cells

Effects of Flanked Units on Optoelectronic Properties of Diketopyrrolopyrrole Based Π-Conjugated Polymers

Effect of Π-Bridges on the Performance of Indeno[1,2-B]fluorene-based Non-Fullerene Small Molecular Acceptors

Effects of chalcogenophene π-bridges on benzodifuran-based polymers for high-performance organic solar cells

Synthesis, Characterization, and Photovoltaic Properties of Carbazole-Based Two-Dimensional Conjugated Polymers with Donor-π-Bridge-Acceptor Side Chains

Indolo[3,2,1-Jk]Carbazole Derivatives-Sensitized Solar Cells: Effect Of Pi-Bridges On The Performance Of Cells

Synthesis, properties, and charge transport characteristics of the conjugated copolymers containing the azaisoindigo and benzothiadiazole units

Effects of Conjugated Bridges on the Photovoltaic Properties of Ortho-Functionalized Perylene Diimides for Non-Fullerene Polymer Solar Cells

The Influence of Fluorinated Position on the Performance of Isoindigo-Based Polymer Solar Cells

Bandgap Engineering of Indenofluorene-Based Conjugated Copolymers with Pendant Donor-Pi-Acceptor Chromophores for Photovoltaic Applications

Synthesis and Properties of Polycarbazole/Fluorene-Based Conjugated Polyelectrolytes with 2,1,3-Benzoselenadiazole and Their Precursors

Donor-Acceptor Copolymers Based on Thermally Cleavable Indigo, Isoindigo, and DPP Units: Synthesis, Field Effect Transistors, and Polymer Solar Cells.

Synthesis and Characterizations of Conjugated Copolymers Containing Benzo[F]Isoindole-1,3-Dione and Diketopyrrolopyrrole Units

How do we get across? Impact of bridging aromatic units on the optical, electronic, and photovoltaic properties of donor-acceptor polymers

Effect of fluorine atoms on optoelectronic, aggregation and dielectric constants of 2,1,3-benzothiadiazole-based alternating conjugated polymers

Novel Conjugated Alternating Copolymer Based on 2,7-Carbazole and 2,1,3-Benzoselenadiazole

Benzoxadiazole and Benzoselenadiazole As Π‐bridges in Nonfullerene Acceptors for Efficient Polymer Solar Cells

Design and Characterization of New D-A Type Electrochromic Conjugated Copolymers Based on Indolo[3,2-b]Carbazole, Isoindigo and Thiophene Units

Novel Medium Band Gap Conjugated Polymers Based on Naphtho[1,2-C:5,6-C]bis[1,2,3]triazole for Polymer Solar Cells

Effects of Including Electron-Withdrawing Atoms on the Physical and Photovoltaic Properties of Indacenodithieno[3,2-B]thiophene-based Donor–acceptor Polymers: Towards an Acceptor Design for Efficient Polymer Solar Cells