Abstract:A Monte Carlo Potts model, including anisotropic boundary energies and mobilities, has been used to investigate cube texture evolution. The work is motivated by the post-recrystallization grain growth seen during annealing of highly cold-rolled nickel sheets, It is observed that during such grain growth the cube texture fraction increases from approx. 50% to more than 95%. Electron back-scatter diffraction orientation measurements of fully recrystallized samples have been used to provide starting microstructures for simulations examining the effect of the texture tightness on the development of the cube texture during grain growth. The texture evolution of a single texture component with an initial average size advantage is controlled predominantly by this size advantage once the initial texture spread of this component falls below some value. An additional set of simulations was also carried out to examine grain growth in systems with a quasi-binary texture. The simulations were used to examine cases of grain growth in where one component has a larger average grain size, but where there is still a significant overlap in the grain-size distribution of each component. The initial microstructures were constructed to give different fractions of each texture component, with a given value of both the mean size and the texture spread of each component. The simulations suggest that for such systems there is a well defined range of conditions for which a single texture component can grow to dominate the final texture.

Study on Grain Topology with Potts Model Monte Carlo Simulation

Monte-carlo modeling for grain growth process in Vapor-Liquid-Solid phase sintered materials

Numerical Simulation and Experimental Validation of Fixed Abrasive Grinding Pad Topography

Generation of Initial Microstructures for Monte Carlo Potts Model Simulations of Quasi-Binary Grain Growth

Monte-Carlo simulation of grain growth in Vapor-Liquid-Solid phase sintered material

Monte-Carlo simulation of isotropic and anisotropic grain growth in liquid phase sintered ceramics

A Novel Approach to Grain Shape Factor in 3D Hexagonal Cellular Automaton

Monte Carlo simulation of abnormal grain growth in two dimensions

A Pore-Scale Model for Quantifying Airflow Paths Through Grain Bulks

Monte Carlo Simulation of Three-Dimensional Polycrystalline Material

Simulation of Three Dimensional Grain Growth for Cu-interconnects

Comparison of grain growth mean-field models regarding predicted grain size distributions

Monte Carlo Simulation of Cube-Texture Evolution During Grain Growth of High-Purity Nickel

Comparison of simulated and measured grain volume changes during grain growth

Topological transitions during grain growth on a finite element mesh

A triple junction energy study using an inclination-dependent anisotropic Monte Carlo Potts grain growth model

Simulation of 3D Grain Growth Process Using Phase Field Model

Modeling of Cube-Texture Evolution During Grain Growth in Ni Thick-Films Based on Experimental Observations

A unified theory of grain growth in polycrystalline materials

Monte Carlo simulation of quantum Potts model

Coarse-Grained Monte Carlo Simulations of the Phase Transition of the Potts Model on Weighted Networks