Abstract:Stress-induced corrosion impairs the mechanical integrity of magnesium (Mg) and its alloys as potential orthopedic implants. Although there has been extensive work reporting the effects of stress on Mg corrosion in vitro, the geometric design principles of the Mg-based orthopedic devices still remain largely unknown. In this work, a numerical simulation model mimicking fractured bone fixation and surgical animal models were applied to investigate the effects of the geometric design of Mg screws on the stress distribution and the stress-induced degradation behavior. Finite element (FE) analysis was used for calculation of stress concentrations around the Mg screws, with different thread type, thread pitch, and thread width. Afterward, the Mg screws of the pre-optimization and post-optimization groups exhibiting the highest and lowest stress concentrations, respectively, were implanted in the fractured distal femora and back subcutaneous tissue of rabbits. Encouragingly, there was a significant difference between the pre-optimization and the post-optimization groups in the degradation rate of the stressed screw parts located around the fracture line. Interestingly, there was no significant difference between the two groups in the degradation rate of the non-stressed screw parts. Consistently, the Mg screw post-optimization exhibited a significantly lower degradation rate than that pre-optimization in the back subcutaneous implantation model, which generated stress in the whole screw body. The alteration in geometric design did not affect the corrosion rate of the Mg screws in an immersion test without load applied. Importantly, an accelerated new bone formation with less fibrous encapsulation around the screws was observed in the Mg group post-optimization relative to the Mg group pre-optimization and the poly (lactic acid) group. Geometry optimization may be a promising strategy to reduce stress-induced corrosion in Mg-based orthopedic devices. Statement of Significance Stress concentrations influence corrosion characteristics of magnesium (Mg)-based implants. The geometric design parameters, including thread type, thread pitch, and thread width of the Mg screws, were optimized through finite element analysis to reduce stress concentrations in a fractured model. The Mg screws with triangular thread type, 2.25 mm pitch, and 0.3 mm thread width, exhibiting the lowest maximum von Mises stress, showed a significant decrease in the volume loss relative to the Mg screws pre-optimization. Compared with the Mg screw pre-optimization and the poly(lactic acid) screw, the Mg screw post-optimization favored new bone formation while inhibiting fibrous encapsulation. Collectively, optimization in the geometric design is a promising approach to reduce stress-induced corrosion in Mg-based implants.

Structure Optimization on Fem Biomechanical Model of Bioabsorable Pure Magnesium Skin Staple

A novel biodegradable magnesium skin staple: A safety and functional evaluation

[Mechanical Analysis on a New Type of Biodegradable Magnesium-Alloy Stent].

A biodegradable magnesium surgical staple for colonic anastomosis: In vitro and in vivo evaluation

Mechanical Analysis of New Type Biodegradable Metal Stents Based on FEM

In Vivo Evaluation of Bending Strengths and Degradation Rates of Different Magnesium Pin Designs for Oral Stapler.

Magnesium Alloy Stent Expansion Behavior Simulated by Finite Element Method

Comparison of Time-Zero Primary Stability Between a Biodegradable Magnesium Bone Staple and Metal Bone Staples for Knee Ligament Fixation: A Biomechanical Study in a Porcine Model

Optimizing structural design on biodegradable magnesium alloy vascular stent for reducing strut thickness and raising radial strength

A Biodegradable Magnesium Alloy Vascular Stent Structure: Design, Optimisation and Evaluation.

Experimental and Computational Analyses of Structural and Mechanical Deviations in Magnesium Alloy Manufacturing with Selective Laser Melting

Effect of Thickness on the Mechanical Properties of Magnesium Alloy Stent

Modeling and Experimental Studies of Coating Delamination of Biodegradable Magnesium Alloy Cardiovascular Stents

A bioabsorbable mechanoelectric fiber as electrical stimulation suture

A biodegradable 3D woven magnesium-based scaffold for orthopedic implants

Design and Mechanical Performance Evaluation of WE43 Magnesium Alloy Biodegradable Stents via Finite Element Analysis

A magnesium screw with optimized geometry exhibits improved corrosion resistance and favors bone fracture healing

Optimized design and biomechanical evaluation of biodegradable magnesium alloy vascular stents

In vivo and in vitro evaluation of a biodegradable magnesium vascular stent designed by shape optimization strategy

Improvement of Mechanical Performance of Bioresorbable Magnesium Alloy Coronary Artery Stents Through Stent Pattern Redesign

Structural optimization and in vitro corrosion analysis of biodegradable Mg-Nd-Zn-Zr alloy clip