Abstract:To reduce carbon emissions associated with substantial concrete usage in construction and achieve the objectives of green and low-carbon construction, this study innovatively develops a low-carbon binary material by adding limestone powder (LP) and silica fume (SF) into the conventional cement-based material, enhancing the comprehensive utility value of LP. The experimental results show that the addition of 15% LP and 5% SF increases the yield stress of the mortar yet substantially reduces the plastic viscosity to 2.84 Nmm·min, representing a 44.5% decrease compared to pure cement slurry. This reduction is conducive to long-distance pumping of the cement-based material. Moreover, the addition of 5% SF compensates for the 18.8% (mid-stage, 28-d) and 15.8% (late-stage, 90-d) strength loss in mortar caused by LP while simultaneously improving the strength of the co-mixed system by 10.4% (mid-stage) and 10.8% (late-stage). In the early-stage measurements of the LP-SF binary cement-based materials, it is observed that while SF slightly increases the hydration heat release, LP suppresses the early hydration heat release. Therefore, the total heat release observed in the 15% LP and 5% SF group after 72 h is only 254 J/g, demonstrating favorable temperature control and crack prevention effects. In addition, X-ray diffraction (XRD) and thermogravimetric/differential thermogravimetric (TG/DTG) phase analysis reveal a notable increase of 53.56% in CH consumption. Besides, the weight loss on ignition of C-S-H crystals increases, indicating that the secondary hydration of LP and the pozzolanic reaction of SF promote the production of C-S-H in the system. Combined with the late-stage strength and water absorption characteristics, it is concluded that the system exhibits good mechanical properties and compactness. This study presents a use of mixed proportion that enables excellent mechanical properties, good pumping performance, and low hydration heat. Moreover, the analysis indicates that the carbon emission of each cubic meter of the as-developed mortar is reduced by approximately 16.7–23.9%, promoting the efficient and clean utilization of LP and SF.

Sustainable Performance of Limestone Cement

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

Effect of High Content Limestone Powder on Microstructure and Mechanical Properties of Cement-based Materials

Performance and life cycle of Portland limestone cement mixes admixed with gypsum

Mechanical Performance of Portland Cement, Coarse Silica Fume, and Limestone (PC-SF-LS) Ternary Portland Cements

Long-term properties of concrete containing limestone powder

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Effect of limestone powder addition on threshold chloride concentration for steel corrosion in reinforced concrete

Effect of steel slag powder, fly ash, and silica fume on the mechanical properties and durability of cement mortar

The Effect of μ-Limestone Additions on the Mechano-Chemical and Microstructural Properties of Slag and Binary Slag/Ground Fly Ash Alkaline-Activated Binders

The Synergistic Effect of Limestone Powder and Rice Husk Ash on the Mechanical Properties of Cement-Based Materials

Properties of Concrete with High-Volume Limestone Powder under Low Temperature Conditions

Chloride Binding Behavior and Pore Structure Characteristics of Low-Calcium High-Strength Cement Pastes

Thermogravimetric analysis and phase characterizations of Portland fly ash limestone cements

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

Compressive strength and environmental impact of sustainable blended cement with high-dosage Limestone and Calcined Clay (LC2)

Influence of C–S–H seed and sodium sulfate on the hydration and strength of limestone calcined clay cement

HYDRATION PROPERTIES OF LIMESTONE POWDER IN COMPLEX BINDING MATERIAL

Hydration reactive of limestone powder in composite cementing material

Enhancement of concrete performance via mixed limestone and granite powders

Effect of the fineness of limestone powder on the properties of calcium sulfoaluminate cement