Abstract:The dynamic response of control valves directly affects the safe and efficient operation of industrial control loops. Valve stiction is a common and persistent issue that causes oscillations in control loops. The stiction behavior of valves has received widespread attention from researchers worldwide in the past two decades. The developed valve stiction models have been widely applied in the detection, quantification, and compensation research of sticky control valves. However, how to more accurately characterize stiction behavior still requires efforts. Most data-driven models do not consider the effects of dynamic response on the stiction behavior. In this paper, the inconsistency of the representative stiction models is discussed during the unidirectional motion of the valve stem, and potential improvements are revealed. An experimental device for valve stiction has been designed. This device can replicate valve stiction caused by tight packing, and measure valve position and friction through smart positioner and force sensor. The second-order dynamic system for the sticky valve is constructed by the physical model, and the response time of the valve is calculated and verified combined with the experiment. The effects of sampling interval on stiction behavior are discussed. On this basis, an improved valve stiction model considering the dynamic response of the valve is proposed, which supplements the situation of stiction during the unidirectional motion of the valve stem. The proposed model can be applied in control systems with fixed sampling intervals that involve sticky valves. It can also be extended to control systems with variable sampling intervals. This work contributes to evaluating the performance of control systems with sticky valves and providing reference value for the detection, quantification, and compensation of valve stiction.

Investigation for Spool Sluggishness and Jamming of Hydraulic Proportional Remote Control Valve

Research on Two Key Technologies of Improving Dynamic Quality of Hydraulic System with High Flow

Hydraulic-feedback Proportional Valve Design for Construction Machinery

Simulation and Experiment on Static Characteristic of Water Hydraulic Proportional Pressure Relief Valve

Research on control characteristic and compensation of water hydraulic proportional pressure relief valve

The Modeling and Control of the Hydraulic Servo System by Using On-Off Valve

The Modeling and Experimental Verification of a Servo-Proportional Valve

Research on Dynamic Characteristics of the Rotary Valve.

Experiment on Proportional Pressure Control of Water Hydraulic System for Water-assisted Injection Molding

Analysis and optimization of a hydraulic-feedback proportional throttlecartridge valve

RESEARCH ON COMPENSATION FOR VARIABLE DEAD-ZONE CHARACTERISTIC OF ELECTRO-HYDRAULIC PROPORTIONAL DIRECTION VALVE IN POSITION CONTROL

Unbalanced Force Analysis on Valve Core Clamping in Hydraulic Spool Valves

Numerical and Experimental Investigation on Opening Direction Steady Axial Flow Force Compensation of Converged Flow Cartridge Proportional Valve

Experimental and Modeling Investigation on Dynamic Response of Sticky Control Valves

Investigation into the Independent Metering Control Performance of a Twin Spools Valve with Switching Technology-controlled Pilot Stage

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

Static and Dynamic Performance Improvement of a Hydraulic Feedback Valve for Load Control by Introducing Force Feedback and Compensation Orifice

Reduction of Steady Flow Torques in a Single-Stage Rotary Servo Valve

Electro-Hydraulic Proportional Flow Valve Control Complex Variable Pump and Research its Property for Injection Machine Hydraulic System

Structure Optimization of Conical Spool and Flow Force Compensation in a Diverged Flow Cartridge Proportional Valve

Modeling and simulation analysis of a novel proportional water flow valve with a digital pilot stage