Abstract:Traditional imaging methods often separate the two technical procedures of optical system design and imaging processing, where the lens subsystem is firstly optimized using an optical measure of performance and the image processing subsystem is optimized subsequently, resulting in the failures in efficient cooperation between the optical and digital elements and missing of the optimal solution. Therefore, an innovative approach is presented to combine optical system design and image processing together to obtain high resolution images from the final system. In this paper, the theoretical foundations for this computing optical design method is analyzed by considering the modulation transfer functions (MTF) and aberrations. According to the wave aberration theory and Zernicke formula, the relationship between the point spread function (PSF) and a certain monochromatic aberration can be obtained. Fourier transformation is taken on these PSFs and then modulus value calculation is adopted to get the MTFs. By analyzing the MTFs of idealized optical systems, the influence of each monochromatic aberration on the image can be concluded. Note that some of the MTFs values have zeros and others do not. Considering that imaging processing algorithm cannot recover the information lost at such zeros, thus some aberrations can be easily corrected through imaging processing algorithm, while others not. Aimed at a single monochromatic aberrations respectively, the optical system with single lens is designed in ZEMAX software and the relevant imaging processing algorithm is adopted. From the comparison among the final images, the theoretical foundations for the computing optical design method considering the MTF and aberrations can be verified. The compensation for aberration of imaging processing can be utilized to reduce the pressure of optical system design. The computing optical design method provides a new approach to simplify structure and reduce cost, as well as to gain high resolution images simultaneously, especially for designing certain complex optical system, which shows promising perspective of industrial application.

The Optical Design of Achromatic Phase Matching System Based on ZEMAX

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

Design of Athermalization for Dual-Band Infrared Optical System Based on Harmanic Diffraction

Design of Off-angle Beaming Device Based on Subwavelength Metal Thin Film Microstructure

Design of reflective lens with Zernike polynomial free form surfaces

Design and testing of optical inspection lens with large-field and high resolution

Aberration Analysis for the Computing Optical Design Method

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Athermal Design And Analysis Of Glass-Plastic Hybrid Lens

Broadband Achromatic Polarization Insensitive Metalens Design in the Near-Infrared Spectrum

Field of View Based Optimization of Aspheric Designed Geometric-Phase Doublet Lenses

Design And Analysis Of A Pair Of Prisms For Widening The Imaging Range Of An Optical System

Generalized Design of A Zero-Geometric-Loss, Astigmatism-Free, Modified Four-Objective Multipass Matrix System

Optimized Design Of Phase Gratings And Analysis Of Diffractive Efficiency

Analytic Design of Segmented Phase Grating for Optical Sensing in High-Precision Alignment System

Experiments of Diffractive Phase Elements Capable of Realizing Desired Functions in Rotationally Symmetric Optical System

Demonstrating and Optimizing the Dual Dispersion and Focusing Functionality of Grating-Fresnel Lens

Design Method of Convex Master Gratings for Replicating Flat-Field Concave Gratings

Design of broadband achromatic metalens in the visible

Design of broadband achromatic metasurface device based on phase-change material GST

Design, Fabrication and Analysis of a Hybrid-Order Monolithic Imaging Diffractive Lens on a Germanium Substrate