Abstract:Method for obtaining model parameters for numerical simulation of polymer materials. Improving the precision of numerical simulations in thermal–mechanical coupling for amorphous polymer materials is crucial for their effective utilization. To enhance the precision of rubber numerical simulations, this study proposed a method considering the temperature and strain rate to establish tensile testing conditions based on the principle of time–temperature equivalence. Additionally, to obtain more precise parameters for hyperelastic constitutive equations, stress relaxation experiments were conducted to determine a set of stress values under complete rubber stress relaxation, which were used to fit the hyperelastic components of the hyper‐viscoelastic algorithm. A finite element model of rubber rebound was established, and a hyperelastic model based on loss factor and a hyperelastic model based on Prony series (hyper‐viscoelastic) were used to calculate the temperature changes caused by rubber rebound coefficient and energy dissipation during the rebound process at 110, 120, and 130°C. We compared the calculation results of these two algorithms with experimental data to verify their accuracy. The research results show that the average error of the rebound coefficient of the hyperelastic algorithm at three temperatures is 3.63%, and the average error of the rebound coefficient of the hyper‐viscoelastic algorithm at these three temperatures is 0.93%. The comparison with the rebound test results shows that the hyper‐viscoelastic method is more accurate and better captures the viscoelastic hysteresis of rubber, but the model calculation time is longer. In addition, at the moment of rebound sample impact, the maximum temperature rise amplitude of the hyperelastic algorithm sample impact position is 2.60, 1.75, and 0.91°C, which are 110, 120, and 130°C, respectively; The maximum heating amplitudes of the hyper‐viscoelastic algorithm are 2.05, 1.35, and 0.61°C. The hyper‐viscoelastic algorithm is closer to the actual test results. Highlights Applied the principle of time–temperature equivalence. Determination of material parameters using the hyper‐viscoelastic algorithm. Calculated the temperature change during the rubber rebound process.

Analysis on the Non-Arrhennius Life Prediction Method of Rubber

Determination of long-chain branching dgree of rubber using triple-detection gel permeation chromatography and carbon nuclear magnetic resonance

Lifetime Prediction of Nitrile Butadiene Rubber Used for O-Ring Sealing

Accelerated Aging Test and Study of Storage Life Prediction of NBR O-Ring

Storage Life Prediction of Rubber Products Based on Step Stress Accelerated Aging and Intelligent Algorithm

Bayesian model averaging based storage lifetime assessment method for rubber sealing rings

Study on the aging of three typical rubber materials under high- and low-temperature cyclic environment

A Study on the Modified Arrhenius Equation Using the Oxygen Permeation Block Model of Crosslink Structure

Theoretical and Experimental Characterization for Macro-Micro Friction Behaviors of EPDM Rubber

Thermo‐oxidative aging behavior and lifetime prediction of rubber latex foam with various natural‐to‐synthetic ratios

Constitutive Model for Thermal-Oxygen-Aged EPDM Rubber Based on the Arrhenius Law

Probabilistic fatigue life prediction model of natural rubber components based on the expanded sample data

A rate-dependent aging constitutive model of EPDM rubber

Research on Vulcanization Process Simulation of Butyl Rubber Based on A New Characterization Model of Curing Degree

High‐precision numerical simulation method for thermal–mechanical coupling in rubbers

Systematic Investigation on the Swelling Response and Oil Resistance of NBR Using the Prediction Models Determined by the Modified Flory–Huggins Interaction Parameter

Prediction of Rubber Fatigue Life Using an Assimilation‐based Learning Approach and Incremental Crack Propagation Model

Experimental Investigations on the Dynamic Mechanical Properties of Aged Rubbers

A method to obtain probabilistic fatigue lives under varying strain peaks for rubber components with small samples

Prediction for O-Ring Type Sealing Ring's Storage Life Based on Accelerated Ageing Data

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing