Abstract:Heat Treatment is an often applied process to realize improved mechanical properties in structural aluminium alloy cast parts, especially for applications in the automotive industry. In many cases a T6/T7 heat treatment, which includes solution treatment, quenching and aging, is the preferred option. For large, thin-walled structural die cast parts, the support during heat treatment has a distinct influence on the deformation during the heat treatment process. The deformation is mainly formed during the solution treatment step, where the part is heated to above 460 °C for several hours for metallurgical reasons. The deformation is caused by gravity forces which lead to creep in the material. As the parts usually only have a few supporting contact areas, the final part distortion can be very sensitive to the design and layout of the support frame. In addition distortions developing during the casting process as well as during all heat treatment process stages must be considered to achieve that the final part meets the dimensional specifications. Up to now only the experience of the expert as well as extensive experimentation based on trial and error are the state-of-the art approaches to find an “optimized” frame design for any new part. This may be time consuming and costly. The work shows how heat treatment support frames can be optimized by virtual experimentation using an integrated simulation approach. A unified creep material model is applied to model the distortion of an industrial thin-walled aluminium structural die cast part. The changing part deformation during the entire casting and heat treatment process as well as the effects of different supporting frame concepts on the distortion will be discussed. The predicted part deformation is compared for different supporting frame designs and is quantitatively assessed using a virtual 6-point (Reference Point System) measurement device.

Application of Orthogonal Experiments Design to Optimize Process Parameters in the Alloy Heat Treatment

Technological Optimization of Aluminum Alloy Prepared by Semi-solid Method

Parameter Optimization of Roundness Quality Control for Machined Parts Based on Grey relational Analysis

Optimization of Injection Molding Process Parameters Based on Orthogonal Experiment

Parameters Optimization Design of Quenching and Partitioning for Best Combination Between Strength and Ductility Using Orthogonal Experimental Design

Parameters Optimization of Low Carbon Low Alloy Steel Annealing Process

A new high-throughput method using additive manufacturing for alloy design and heat treatment optimization

Optimization on Heat Treatment Process of 45crmnsi Steel by Orthogonal Test

Process parameter optimization for local post-weld heat treatment.of turbine rotor based on uniform design

CALPHAD Simulation and Experimental Study on Heat Treatment Process of Al-Cu-Mn-Mg-Sc Cast Alloys

Experimental Study and Optimization on Solution and Artificial Aging of Cold-Rolled 2024 Al Alloy Sheet

OPTIMIZATION OF HEAT TREATMENT SUPPORT FRAMES FOR ALUMINUM ALLOY STRUCTURAL CAST PARTS USING VIRTUAL EXPERIMENTATION

Multi-objective optimization with automatic simulation for partition temperature control in aluminum hot stamping process

Optimizing the Heat Treatment Method to Improve the Aging Response of Al-Fe-Ni-Sc-Zr Alloys

Heat Treatment Optimizing of MgZnZr Alloy

Machine learning assisted multi-objective optimization for materials processing parameters: A case study in Mg alloy

Optimization of Heat Treatment in Az64 Magnesium Alloy

Parameter Optimization in High-Throughput Testing for Structural Materials

Optimization of Injection Molding Processing Parameters of Display Shell Based the Orthogonal Experiment

Research on Alloy Design and Process Optimization of Al–Mg–Zn-Cu-Based Aluminum Alloy Sheets for Automobiles with Secured Formability and Bake-Hardenability

The Effect of Heat Aging on the Microstructure and Properties of Spray-Deposited AlZnMgCu Alloy Extruded Plates