Abstract:The mount bracket is an important part of the mount system, and its dynamic characteristics will affect dynamic characteristics of the mount system, which means it will affect NVH(Noise, Vibration, Harshness) of the vehicle. Based on the large error between the test result and the finite element analysis(FEA) result, the dynamic finite element model of the mount bracket can be modified from the material parameters and the equivalent boundary of the bolt joint. In this paper, a method to identify the parameters of the mount bracket model by combining modal test, FEA, and the mathematical optimization model was presented. Firstly, based on HyperStudy platform, the optimization objective was minimizing the natural frequency error between FEA and free mode test, and the material parameters of the bracket to be identified were used as design variables to build the optimization function. The global response surface method was used for iteration to complete the identification. Then, because the dynamic characteristic parameters of the bolt joints of the mount bracket have an important influence on the test results, an equivalent model using spring element to simulate the stiffness of bolt joints was established. Again, based on the equivalent model and the parameter identification method, the optimization objective was minimizing the natural frequency error between FEA and modal test under constraint conditions, and the stiffness parameters of spring elements were identified by iterative optimization to finish the modification of the mount bracket boundary model. At last, the modified finite element model was applied to the dynamic characteristics analysis of two different mount brackets. The results showed that the maximum error of natural frequency between the simulation value and the test value could satisfy the engineering requirement well, which indicated that the modified model had a good prediction accuracy and engineering application.

The Optimization and Improvement of Truck Brake Caliper Bracket Based on the Finite Element Method

Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method

Prediction and Optimization of the Disc Brake Squeal Performance with Altair HyperWorks and ANSYS

Performance calculation and structure design for vehicle Powertrain mounting bracket

Strength and modality analysis on structure of fuel cell vehicle subframe

A Deformation Analysis and Compensation Algorithm for Bracket Structure of Automatic Drill-Riveting System

Dynamic analysis and optimization of lifting lug fixed to axle box of metro vehicle

Novel Lightweight Connecting Bracket Design with Multiple Performance Constraints Based on Optimization and Verification Process

Analysis and Redesign of Connection Part in Cargo Truck Chassis for Fatigue Durability Performance

Design and performance analysis of pneumatic disc brake of a new energy commercial vehicle

Strength Analysis and Improvement of a Heavy-Duty Truck Frame

Surface Structure Design of High Speed Heavy Duty Brake Disc Based on Topography Optimization

Topology Optimization and Strength Analysis of Mount Bracket for Powertrain

Simulation and test on braking performance of heavy-duty truck with multi-axis braking system

Finite Element Analysis and Topology Optimization Design of Seat Bracket for New Energy Bus

Finite Element Model Modification of the Mount Bracket Based on Modal Test

Study on Structure Optimization and Vibration Fatigue Analysis of Aluminum and Composite Brake Control Boxes

Topological Optimization Design for Powertrain Mount Framework of Automobiles

Equal heat flux loading optimization approach for uniform wear of the wet brake

Multi-objective optimization of disc brake structure based on heat transfer performance

Finite Element Analysis and Optimum Design of Rear-loading Compression Garbage Truck