Abstract:This study involves synthesizing peanut hull hydrochar (PHH) and a PHH/β-CD/Fe3O4 magnetic composite through hydrothermal and chemical precipitation methods, respectively, to use as effective adsorbents for Pb2+ removal. Vibrating-sample magnetometry (VSM) and Brunauer-Emmett-Teller (BET) analyses revealed that the magnetic saturation value and specific active surface area of PHH/β-CD/Fe3O4 are 31.543 emu/g and 32.123 m2/g, respectively. The impact of key variables on adsorption efficiency was evaluated using the response surface method - central composite design. ANOVA results (F-value: 166.22 and p-value: <0.05) demonstrated that the model effectively assesses the interaction of variables in the adsorption process. Additionally, R2, Adjusted R2, and Predicted R2 values were 0.999, 0.986, and 0.975, respectively, indicating the model's high adequacy in describing response changes. The maximum efficiency for Pb2+ adsorption was found to be 95.35% using PHH and 99.73% with the PHH/β-CD/Fe3O4 magnetic composite. These measurements were taken at a temperature of 25 °C, an adsorbent dose of 1 g/L, a pH of 6, and a Pb2+ concentration of 5 mg/L, with respective contact times of 130 min and 50 min. Thermodynamic analysis revealed negative enthalpy and Gibbs free energy values, indicating that the adsorption process is exothermic and spontaneous. The negative entropy parameter suggests a reduction in random interactions during the process. The Pb2+ adsorption data for both PHH (R2: 0.982) and PHH/β-CD/Fe3O4 (R2: 0.985) were best described by the Pseudo 2nd order kinetic model. Equilibrium data followed the Freundlich model, with R2 values of 0.981 for PHH and 0.990 for PHH/β-CD/Fe3O4, highlighting the importance of heterogeneous surfaces in the removal process. The maximum adsorption capacities for Pb2+ were 26.72 mg/g for PHH and 33.88 mg/g for PHH/β-CD/Fe3O4. Reuse and stability tests confirmed the structural stability and reusability of the adsorbents. Therefore, the PHH/β-CD/Fe3O4 magnetic composite is a promising option for removing Pb2+ from aqueous solutions.

The Application of Response Surface Methodology for Adsorption Optimization of Lead (II) onto Phosphogypusum

Adsorption of lead(II) from aqueous solution using Africa elemi seed, mucuna shell and oyster shell as adsorbents and optimization using Box–Behnken design

A study by response surface methodology (RSM) on optimization of phosphorus adsorption with nano spherical calcium carbonate derived from waste.

Effective Cu(II) ions adsorption from aqueous solutions using low grade oolitic hematite tailing with phosphorus: response surface methodology

Effective Adsorption of Aqueous Pb2+ by Dried Biomass of Landoltia Punctata and Spirodela Polyrhiza

Lead Adsorption on Loess under High Ammonium Environment

Modeling and optimization of biosorption of lead (II) ions from aqueous solution onto pine leaves (Pinus kesiya) using response surface methodology

Application of phosphogypsum and phosphate-solubilizing fungi to Pb remediation: From simulation to in vivo incubation

Response surface modeling of lead (׀׀) removal by graphene oxide-Fe3O4 nanocomposite using central composite design

Effective adsorption of Pb(ii) from wastewater using MnO2 loaded MgFe-LD(H)O composites: adsorption behavior and mechanism

Conversion of Phosphogypsum into Porous Calcium Silicate Hydrate for the Removal and Recycling of Pb(II) and Cd(II) from Wastewater

Optimization of Pb(II) ions adsorption on nanohydroxyapatite adsorbents by applying Taguchi method

Biosorption of Pb (II) by extracellular polymeric substance of Lysinibacillus sp. SS1: optimization, kinetics, and isotherms

Surface Mole-Ratio Method to Distinguish Surface Precipitation and Adsorption on Solid-Liquid Interface.

Modeling of the Adsorption Breakthrough Behaviors of Pb2+ in a Fixed Bed of ETS-10 Adsorbent.

Preparation and Optimization of the Adsorbent for Phosphorus Removal Using the Response Surface Method

Adsorption of Pb 2+ by inorganic liquid-treated sepiolite: Adsorption process optimization and mechanism analysis via response surface methodology

Preparation of chitosan/lignosulfonate for effectively removing Pb(II) in water

Utilization of peanut hull hydrochar /beta cyclodextrin/Fe3O4 magnetic composite for lead ion removal from water solution

Optimizing Adsorption of Co(II) and Ni(II) by 13× Molecular Sieves Using Response Surface Methodology

Efficient lead sorption by ammonium phosphomolybdate: experimental and density functional theory (DFT) studies