Abstract:Abstract Sulfadiazine (SDZ) is a commonly used antibiotic in medicine, aquaculture, and animal husbandry. However, its misuse has resulted in its release into soil and water environments, posing a gradual threat to the environment and human health. In this study, cotton pulp, poplar sawdust, and corn stover were chosen as raw materials. Zinc chloride (ZnCl 2) was used as a modifier to prepare modified porous carbon through pyrolysis at different carbonization temperatures (400 and 800°C). The objective was to investigate the adsorption effect and mechanism of modified porous carbon on SDZ in aqueous environments, as well as the effect of different biomass fractions of the carbon source on the adsorption effect. The physical and chemical properties of the modified porous carbon were characterized by various means of characterization, and the results showed that the high temperature and modification effects made the adsorbent material possess a larger specific surface area and richer pore structure, higher aromaticity, higher degree of graphitization, etc., which would be beneficial for the adsorption of SDZ. Among them, CCPZ800 showed the highest saturation adsorption of SDZ, Q max = 425.45 mg/g. The adsorption experiments were carried out by changing the initial conditions and fitted with kinetic and isothermal adsorption to further explain the adsorption mechanism of modified porous carbon on SDZ in conjunction with the adsorption of SDZ by hydrothermal carbon materials. The results showed that the adsorption of modified porous carbon on SDZ conformed to the quasi-secondary kinetic and Freundlich isothermal adsorption models. Adsorption mechanism of SDZ on modified porous carbon followed a multimolecular layer adsorption, with chemical adsorption being the dominant process. Both physical adsorption and chemical adsorption occurred simultaneously, with the main adsorption mechanism being π–π conjugation. In addition, compositional distribution of biomass from different carbon sources results in variations in pyrolysis mode and pyrolysis products, which in turn affect adsorption. By analyzing the effect of variability in the composition of biomass on the adsorption effect of SDZ, it can be concluded that higher cellulose content in the carbon source leads to a better adsorption effect of SDZ. The study showcases the effectiveness of ZnCl 2 -modified porous carbon in removing SDZ from water, offering insights into the selection of raw materials for this adsorbent preparation.

Enhanced Adsorption of Dimethyl Sulfide by Micronized Carbonaceous Adsorbent

STUDY ON THE MECHANISM OF GRANULAR ACTIVATED CARBON TO ADSORB DIMETHYL TRISULFIDE AND β-CYCLOCITRAL

Adsorption of dimethyl sulfide from aqueous solution by a cost-effective bamboo charcoal

Adsorption Characteristics of Powdered Activated Carbon to Dimethyl Sulfide

Co-regulating the pore structure and surface chemistry of sludge-based biochar for high-performance deodorization of gaseous dimethyl disulfide

Promoting Effect of Surface Acidities on Efficiency of Copper Modifier for Ordered Mesoporous Carbon-Sio2-Al2o3 Nanocomposites in Adsorptive Desulfurization

Adsorption–desorption Behavior and Mechanism of Dimethyl Disulfide in Liquid Hydrocarbon Streams on Modified Y Zeolites

Study on the Adsorption Behavior and Mechanism of Dimethyl Sulfide on Silver Modified Bentonite by in Situ FTIR and Temperature-Programmed Desorption

Adsorption of Carbon Disulfide on Cu/CoSPc/Ce Modified Activated Carbon under Microtherm and Micro-oxygen Conditions

Preparation of High Performance Adsorbents by Functionalizing Mesostructured Silica Spheres for Selective Adsorption of Organosulfur Compounds

Chemical Liquid Deposition Modified ZSM-5 Zeolite for Adsorption Removal of Dimethyl Disulfide

Enhancing the Adsorption Performance of 2-Methylisoborneol by Activated Carbon by Promoting Hydrophobic Effects

Preparation of Low Cost Activated Carbon from Deactivated Resin Catalyst for Methyl Tert-Butyl Ether Synthesis and Its Application in Dimethyl Sulfide Adsorption with Transition Metal Impregnation

Adsorption Desulphurisation of Dimethyl Sulphide Using Nickel-Based Y Zeolites Pretreated by Hydrogen Reduction

Metal Ion Modified Anionic Surfactant Templated Mesoporous Silica Adsorption Materials for the Removal of Dimethyl Sulfide

Adsorption of Carbon Disulfide on Activated Carbon Modified by Cu and Cobalt Sulfonated Phthalocyanine

Investigating the adsorption mechanism of zinc chloride-modified porous carbon for sulfadiazine removal from water

Removal of Hydrogen Sulfide and Sulfur Dioxide by Carbons Impregnated with Triethylenediamine

Enhanced Adsorption of Atrazine on A Coal-Based Activated Carbon Modified with Sodium Dodecyl Benzene Sulfonate under Microwave Heating

Functionalized Activated Carbon for Competing Adsorption of Volatile Organic Compounds and Water

Simulation Study for the Adsorption of Carbon Disulfide on Hydroxyl Modified Activated Carbon