Abstract:Transition metal oxides,especially manganese monoxide(MnO),are being intensively studied as candidate anode materials for next generation lithium-ion batteries in high efficiency energy storage applications such as portable electronics,electric vehicles,and stationary electricity storage.In this paper, the MnC_2O_4·2H_2O precursor,prepared from KMnO_4 and ascorbic acid,was heat-treated to synthesize nano MnO by a solid-state reaction approach.X-ray diffraction(XRD) showed that the so-obtained MnO had a rock-salt structure with good crystallinity,and scanning electron microscopy(SEM) indicated that the primary particle size was about 50-100 nm,while the secondary particle size was about 400-600 nm.As an active material for lithium-ion batteries,the nano MnO material delivered a reversible capacity of 679.7 mAh ? g~(-1) with an initial columbic efficiency of 68.9%at a current density of 46.3 mA ? g~(-1).The specific discharge capacity slightly decreased from 584.5 to 581.5 mAh ? g~(-1) with a retention of 99.5%after 50 cycles at a current density of 141.1 mA·g~(-1).Moreover,the material was able to release a capacity of 290 mAh ? g~(-1) at current densities as high as 494.7 mA ? g~(-1)(corresponding to ~2C),which demonstrates reasonable rate performance and moderately fast charge/discharge capabilities.All of the above characteristics make nano MnO promising anode materials for developing high-capacity,long-life,low-cost, and environmentally-friendly lithium-ion batteries.

MnO/CNTs Composite As Anode Material for Lithium Ion Batteries

The composite rods of MnO and multi-walled carbon nanotubes as anode materials for lithium ion batteries

Fabrication of MnO@C-CNTs composite by CVD for enhanced performance of lithium ion batteries

Synthesis and Performance of Nano MnO As an Anode Material for Lithium-Ion Batteries

Mn3O4/CNT Nanocomposites Derived from Waste Manganese Resources As High Performance Anode Materials for Lithium Ion Batteries

The composite sphere of manganese oxide and carbon nanotubes as a prospective anode material for lithium-ion batteries

MnxOy Embedded Within CNT Supporting Porous Carbon for Enhanced Lithium Storage

Carboxylated carbon nanotube anchored MnCO3 nanocomposites as anode materials for advanced lithium-ion batteries

High-performance lithium-ion battery anodes based on Mn3O4/nitrogen-doped porous carbon hybrid structures

MnO2 Nanoflakes Anchored on Carbon Nanotubes As Self-Standing Anode for Sodium Ion Batteries

High Rate Hybrid MnO2@CNT Fabric Anode for Li-Ion Batteries: Properties and Lithium Storage Mechanism by In-Situ Synchrotron X-Ray Scattering

Manganese Monoxide/titanium Nitride Composite As High Performance Anode Material for Rechargeable Li-ion Batteries

A Facile Route to Synthesize Nano-Mno/c Composites and Their Application in Lithium Ion Batteries

Facile Synthesis of MnO/C Anode Materials for Lithium-Ion Batteries

Coaxial MnO2Nanoshell/CNFs Composite Film Anode for High-Performance Lithium-Ion Batteries

Coaxial MnO/C Nanotubes As Anodes for Lithium-Ion Batteries

MOF-derived MnO/C composites as high-performance lithium-ion battery anodes

Tailoring carboxyl tubular carbon nanofibers/MnO 2 composites for high‐performance lithium‐ion battery anodes

MnO Quantum Dots Embedded in Carbon Nanotubes As Excellent Anode for Lithium-Ion Batteries

Synthesis and Electrochemical Properties of Manganese Oxides/Carbon-Nitrogen Three-Dimensional Networks Composite as an Anode Material for Lithium Ion Batteries

Facile Synthesis of Porous MnO/C Nanotubes As a High Capacity Anode Material for Lithium Ion Batteries.