Abstract:The microstructure evolution, mechanical response and deformation mechanism of the extruded Mg2.5Nd-0.5Zn-0.5Zr alloy sheet by high-temperature (423-573 K) tensile were investigated. The results showed that the alloy exhibited excellent high-temperature mechanical properties at 523 K (extrusion direction (ED): ultimate tensile strength (UTS)~191.5 MPa, yield strength (YS)~154.5 MPa, elongation (EL) ~30.1%; transverse direction (TD): UTS~190.5 MPa, YS~148.2 MPa, EL~35.2%). The YS of ED and TD of the alloy decreased linearly, and the anisotropy of the alloy decreased gradually (from 0.9261 to 1.009) with the increase of tensile temperature, which was beneficial to the subsequent processing of the alloy. Moreover, the decreased anisotropy was the result of grain size, second phase particles size and texture state. The microstructure showed obvious deformed structures at 423 K and it was gradually replaced by dynamic recrystallization with an average grain size of 3.3-4.2 mu m and the texture strength weakened greatly (maximum pole density value reduced from 15.8 to 4.0) as the temperature increased to 573 K. Meanwhile, both the deformation models and the contributions of different deformation mechanisms at different tensile temperatures were roughly estimated. It was found that basal slip was always the main deformation mechanism at different tensile temperatures, but its contribution to deformation decreased with increased tensile temperatures (from 93.0% to 66.6%). With the increase of tensile temperature, the degree of prismatic slip (from 4.1% to 23.2%) and pyramidal slip (from 2.9% to 10.2%) in deformation gradually increased. (c) 2022 Elsevier B.V. All rights reserved.

Tensile Properties of Hot Extruded Mg-Zn-Nd-Y-Zr Alloy at Elevated Temperatures

Study on Tensile Behavior at Various Temperatures of the Mg-7Gd-5Y-1Nd-2Zn-0.5Zr Alloy

Microstructures and Mechanical Properties of Extruded Mg-9Gd-4Y-0.6Zr-T5 at Elevated Temperatures

Elevated temperature mechanical behavior of Mg-Y-Zn alloys

Unveiling the mechanical response and deformation mechanism of extruded Mg-2.5Nd-0.5Zn-0.5Zr alloy sheet under high-temperature tensile

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Mechanical Properties and Deformation Mechanisms of Mg-Gd-Y-Zr Alloy at Cryogenic and Elevated Temperatures

Low temperature mechanical properties of as-extruded Mg–10Gd–3Y–0.5Zr magnesium alloy

Mechanical Behavior and Failure Mechanism of an As-Extruded Mg-11 Wt％y Alloy at Elevated Temperature

Microstructure and Mechanical properties of Extruded Mg-3Nd-0.2Zn-0.4Zr (wt. %) Alloy

Microstructure evolution, strengthening mechanisms and deformation behavior of high-ductility Mg−3Zn−1Y−1Mn alloy at different extrusion temperatures

Influence of Extrusion Temperature on Microstructure and Mechanical Properties of Mg-4Y-4Sm-0.5Zr Alloy

High Temperature Compressive Deformation Behavior of an Extruded Mg–8Gd–3Y–0.5Zr (wt.%) Alloy

Hot deformation behaviors of an extruded Mg-Li-Zn-Ce-Y-Zr alloy

Deformation behaviors and the related high-temperature mechanical properties of Mg-11Gd-5Y-2Zn-0.7Zr via regulating extrusion temperatures

Microstructure and Mechanical Properties of a Mg-Zn-Y-Zr Alloy Processed by Thermo-Mechanical Treatment

Precipitation Behavior and Mechanical Properties of a Mg–Zn–Y–Zr Alloy Processed by Thermo-Mechanical Treatment

Tensile behavior at various temperatures of the Mg-Gd-Y-Zn-Zr alloys with different initial morphologies of LPSO phases prior to extrusion

Microstructure and Mechanical Properties of Extruded Mg-Zn-Nd-Y-Zr-Ca Alloy

Microstructure and tensile properties of a low-alloyed magnesium alloy: effect of extrusion temperature

Research on microstructure and mechanical properties of hot extruded Mg-Gd-Y-Sm-Zr alloy at room and high temperatures