Abstract:As the key component to control the driving direction of the vehicle, the steering device always bears large vibration and load. In order to improve structural performance and reduce costs, a multi-objective optimization method based on the results of prestressed modal analysis was proposed, which can achieve significant lightweight and cost-effectiveness improvement. Based on the principle and working characteristics of the steering device, the minimum value of mass, minimum value of maximum stress, maximum value of equivalent stiffness were set as optimization objectives. Through finite element analysis, the prestressed modal module was constructed, and the strength and modal characteristics of the steering device were obtained. In order to verify the accuracy of prestressed modal analysis, the vibration testing experimental platform was built in a non free state. The excitation and response signals can be obtained through sensors and data acquisition devices and used as input and output data. According to the comparative analysis of simulated vibration modes, it can be concluded that the coupling analysis of strength and mode is more in line with actual boundary conditions and has high reliability. The DOE (Design of Experience) method was adopted to construct discrete corresponding values between design variables and optimization objectives based on the results of prestressed modal analysis. In order to better evaluate the cost-effectiveness of lightweight, a comparative analysis was conducted on the results of primary and secondary lightweight. The results show that the prestressed modal analysis method can achieve good dynamic analysis accuracy. Without reducing strength and equivalent stiffness, the mass of the steering device can be reduced by 14 %, achieving high economic benefits.

Modal Analysis of Portable Multifunctional Scooter Based on Solidworks

Modal Analysis and Structure Design for Hydraulic Muffler

Design and Analysis of Folding Mechanism for Intelligent Wheelchair-Stretcher Robot

The Experimental Modal Analysis of Motorcycle Structure

Modal Analysis and Structural Modification of the Heavy-duty Oil Cylinder Billet Transporting System

Modality analysis on the structure of a novel bionic miniature water strider robot.

[Structural Design and Analysis of Portable Intelligent Wheelchair for Knee Rehabilitation]

Static Analysis and Modal Analysis of Heavy-Load Manipulator Based on Ansys

Mechanism Design and Analysis of a Multifunctional Device for Lower Limb Disabilities

Modal Analysis of Rotational Part Based on ANSYS

Lightweight steering equipment based on prestressed modal analysis

Dynamic Analysis and Optimization of a Solar Car Using FE Method

Mechanical Design and Kinematics of a Multimodal Two-wheeled Robot

Multi-disciplinary design optimisation considered fluid-structure interaction and life prediction applied in the lightweight carbody structure

An approach for mobility and force/motion transmissibility analysis of parallel mechanisms based on screw theory and CAD technology

Structure Design of Multifunctional Wheel Chair and Its Finite Element Analysis

Analysis and Simulation of Deployable Modularized Truss Mechanisms

Modal Strain Based Method for Dynamic Design of Plate-Like Structures

Analysis and optimization of pre-stressed modal features of ship anchor support parts

The Structure Modal Analysis and Engineering Application of the Passenger Car Driver’s Seat System

Optimization and Structural Analysis of Automotive Battery Packs Using ANSYS