Numerical investigation on gaseous fuel injection strategies on combustion characteristics and NO emission performance in a pure hydrogen engine
Chun Lu,Wei Chen,Qingsong Zuo,Chuanfu Kou,Hui Wang,Gang Xiao,Guohui Zhu,Ying Ma
DOI: https://doi.org/10.1016/j.fuel.2024.130911
IF: 7.4
2024-01-18
Fuel
Abstract:With the proposal of "dual-carbon" goals and increasingly stringent emission regulations, hydrogen as a zero-carbon alternative fuel has great potential in engine applications. In the appliance of pure hydrogen engines, direct injection plus lean burn technology can effectively improve engine performance and reduce emissions. Therefore, this work establishes a three-dimensional (3D) simulation model of the pure hydrogen spark-ignition internal combustion engine (ICE) coupled with chemical reaction kinetics. Then, the applicability of different commonly used hydrogen simplified mechanisms to characterize the combustion process based on experimental data is evaluated, and the feasibility of the transient calculation model is verified. Then, the engine combustion and emission performance are compared by adopting hydrogen port injection (HPI) and hydrogen direct injection (HDI) strategies. Meanwhile, the effects of hydrogen injection timing (HIT) on flow, combustion and nitric oxide (NO) emission processes under direct injection plus lean burn mode are analyzed. The results show that: 1. For mixture distribution at ignition timing (IT), the hydrogen should be distributed near the spark plug and avoid its concentration being too rich since the richer mixture will lead to intense combustion and rapid heat release. 2. When using HDI mode, the engine combustion performance and power performance are better than that of the HPI mode. Delaying HIT, the power performance improves under HDI modes, while both the indicated thermal efficiency (ITE) and indicated mean effective pressure (IMEP) reached the maximum at Case6-HDI-100 with the values are 40.52 % and 0.498 MPa, respectively. 3. Considering the engine combustion, power and emission performance, Case6-HDI-100 (HIT at 100 °CA BTDC) is the preferred scheme. Its ITE and IMEP are 8.49 % and 37.33 % higher than that of Case1-HPI (HPI mode scheme) and 6.50 % and 14.95 % higher than that of Case4-HDI-220 (the lowest scheme under HDI mode), respectively, while nitrogen oxide (NO x ) emissions meet the European Stage V non-road emission standards. This study provides some reference values for the combustion design of pure hydrogen ICEs.
energy & fuels,engineering, chemical