Abstract:Objective: The lower extremity of the occupant represents the most frequently injured body region in motor vehicle crashes. Knee airbags (KABs) have been implemented as a potential countermeasure to reduce lower extremity injuries. Despite the increasing prevalence of KABs in vehicles, the biomechanical interaction of the human lower extremity with the KAB has not been well characterized. This study uses computational models of the human body and KABs to explore how KAB design may influence the impact response of the occupant's lower extremities.Methods: The analysis was conducted using a 50th percentile male occupant human body model with deployed KABs in a simplified vehicle interior. The 2 common KAB design types, bottom-deploy KAB (BKAB) and rear-deploy KAB (RKAB), were both included. A state-of-the-art airbag modeling technique, the corpuscular particle method, was adopted to represent the deployment dynamics of the unfolding airbags. Validation of the environment model was performed based on previously reported test results. The kinematic responses of the occupant lower extremities were compared under both KAB designs, 2 seating configurations (in-position and out-of-position), and 3 loading conditions (static, frontal, and oblique impacts). A linear statistical model was used to assess factor significance considering the impact responses of the occupant lower extremities.Results: The presence of a KAB had a significant influence on the lower extremity kinematics compared to no KAB (P <.05) by providing early restraint and distributing contact force on the legs during airbag deployment. For in-position occupants, the KAB generally tended to decrease tibia loadings. The RKAB led to greater lateral motion of the legs compared to the BKAB, resulting in higher lateral displacement at the knee joint and abduction angle change (51.221.7mm and 15 degrees +/- 6.0 degrees) over the dynamic loading conditions. Change in the seating position led to a significant difference in occupant kinematic and kinetic parameters (P <.05). For the out-of-position (forward-seated) occupant, the earlier contact between the lower extremity and the deploying KAB resulted in 28.4 degrees +/- 5.8 degrees greater abduction, regardless of crash scenarios. Both KAB types reduced the axial force in the femur relative to no KAB. Overall, the out-of-position occupant sustained a raised axial force and bending moment of the tibia by 0.8 +/- 0.2kN and 21.1 +/- 8.7Nm regardless of restraint use.Conclusions: The current study provided a preliminary computational examination on KAB designs based on a limited set of configurations in an idealized vehicle interior. Results suggested that the BKAB tended to provide more coverage and less leg abduction compared to the RKAB in oblique impact and/or the selected out-of-position scenario. An out-of-position occupant was associated with larger abduction and lower extremity loads over all occupant configurations. Further investigations are recommended to obtain a full understanding of the KAB performance in a more realistic vehicle environment.

An Optimization Design of Knee Airbag for Driver Protection from Inter-City Coach Frontal Impact

Multi-Parameter and Multi-Objective Optimization of Occupant Restraint System in Frontal Collision

Modelling and simulation of a sandwiched tube-type airbag and its optimization using design of experiments

Computational Investigation of the Effects of Knee Airbag Design on the Interaction with Occupant Lower Extremity in Frontal and Oblique Impacts.

Injury effects of knee airbags on Chinese human dummy

Optimization design of side airbag based on side impact simulation

Multiobjective optimization on cooperative control of autonomous emergency steering and occupant restraint system for enhancing occupant safety

Concept Analysis and Optimization of Lower Leg Impact for Car Pedestrian Protection

Protecting occupant in autonomous vehicle accident with rotating seat and belt airbag

Optimization of Occupant Restraint System Using Machine Learning for THOR-M50 and Euro NCAP

Optimizing frontal impact occupant protection systems for passengers seated in wheelchairs

A Study on the Correlation Between Airbag Folding Patterns and the Injury of Out-of-Position Occupants

Optimizing vehicle Front-End structure for e-bike rider Safety: An advanced Multi-Objective approach using injury prediction models

3D Video Motion Analysis Study on Occupant Protection

Numerical and experimental investigations on the behaviour of the sandwiched tube-type airbag

Injury Biomechanics Evaluation of a Driver with Disabilities during a Road Accident-A Numerical Approach

Development and Optimization of a New Occupant Restraint System for Improving Mini Vehicle Safety

Driver Restraint System Optimization for Vehicle Frontal Impact

Numerical parametric study on factors affecting passenger safety in motorcoach frontal collision

Sensitivity Analysis and Interval Multi-Objective Optimization for an Occupant Restraint System Considering Craniocerebral Injury

Optimized low-risk deployment of a passenger airbag with a passenger protection wrap considering pressure dispersion