Evaluation of RPV closure head penetration integrity considering fitting and residual stresses
Mingya Chen,Hongbo Gao,Xin Sun,Weiwei Yu,Shuiyong Wang,Lei Lin,Wanxiang Zhao,QunJia Peng,Fangjie Shi
DOI: https://doi.org/10.1016/j.nucengdes.2024.113254
IF: 1.7
2024-05-02
Nuclear Engineering and Design
Abstract:To ensure the structure integrity of the Reactor Pressure Vessel (RPV), the main challenge is the embrittlement of beltline material. However, the stress is more complex for the regions of Closure Head Penetration (CHP). Feedback of leakage at the CHP has been found during in-service inspection. Although the detailed mechanical evaluation of the RPV head and the CHP has been carried out by many international institutions, there are limited studies to concern structure integrity of CHP tube. The systematic analysis of the influence of material strength matching, assemble stress, the Welding Residual (WR) stress and work pressure load on the fracture is also limited. In this paper, the systematic influence of these factors is analyzed, and the distribution characteristics of Stress Intensity Factor (SIF) and the crack propagation characteristics are studied. The 2D model and accurate 3D model are carried out using the finite element method. The results show that the WR stress on the outer surface of the CHP and the area adjacent to the weld is larger than the yield strength of the material. There is a gap between the RPV and the upper part of the CHP. The attenuation rate of the WR stress in the outlet direction of RPV is lower than that in the inlet direction, so cracks are more likely to occur in the out of direction. The influence of WR stress on the circumferential stress distribution and fracture parameters in the wall thickness direction of CHP is bigger than the influence of assemble load and design condition load. However, the overall stress of CHP is low. The SIF values along the crack front have an asymmetric distribution, and the SIF value is very small. As the fatigue crack propagation life is much longer than the assumed limit in the design lifetime, the risk of fracture and crack fatigue propagation caused by mechanical stress is low.
nuclear science & technology