Abstract:Canadian Supercritical Water-cooled Reactor (SCWR) is a pressure-tube type SCWR under development in Canada. Once-through direct cycle is adopted in the design. The reactor and the turbine are tightly coupled. A suitable strategy is necessary to deal with the relationship between the reactor and the turbine for safe and smooth plant operation. A turbine dynamic model is derived together with the reactor model to complete the nonlinear plant model. Three basic control strategies: reactor-leading, turbine-leading and feedwater-leading are applied to the Canadian SCWR. Input-output pairings of the control systems are determined based on the different strategies and Proportional and Integral (PI) controllers are tuned to meet the control requirements. A typical load pattern is introduced to test the control performance. Through simulation, it is found that the load following capacity with the reactor-leading strategy is low while the fluctuations in the thermal parameters are large with the turbine-leading and feedwater-leading strategies. Therefore, a new control strategy is needed to deal with these drawbacks. A coordinated control strategy is proposed to achieve high load following capacity with small variation in the thermal parameters. It is established based on the turbine-leading strategy by adding a feedforwad control system to balance the reactor and the turbine. In the feedforward control system, the input signal is the difference between the steam pressure and its setpoint, and the outputs are the control rod reactivity and the feedwater flow rate. In such a way, the power-to-flow ratio can be maintained in a correct proportion to reduce the fluctuations in the thermal parameters. Simulations are performed by introducing a typical load pattern. From the responses, it is found that the turbine power can closely follow the load demand and the variation in the steam temperature is efficiently suppressed compared to that with the turbine-leading strategy. It can be concluded that the proposed control strategy is applicable for the Canadian SCWR and smooth operation can be achieved.

Application of an Improved Mechanical Shim Control Strategy for AP1000 Reactor

A Decoupled Mechanical Shim Core Control Strategy for a Pressurized Water Reactor Using Feedforward Compensation and a Multimodel Approach

Design of Decoupled Mechanical Shim Control System for a Generation III+ Pressurized Water Reactor Based on Feedforward Compensation and Multimodel Approach

Study of the Reactor Control System of MSHIM in AP1000

Development Of A Fast Simulation Program For Ap1000 Reactor With Application Of Mechanical Shim (Mshim) Control Strategy And Nodal Method

Control Parameter Optimization for AP1000 Reactor Using Particle Swarm Optimization

Icone23-1080 optimization of mechanical shim control system parameters for ap1000 reactor using particle swarm optimization

Dynamic simulation and study of Mechanical Shim (MSHIM) core control strategy for AP1000 reactor

Dynamic Simulation and Control Studies of CPR1000 Reactor Core with Advanced MSHIM Control Strategy

Transient Simulations of CPR1000 Nuclear Power Plant Implementing Advanced Mechanical Shim Control System

Optimization of AP1000 power control system setpoints using genetic algorithm

Design of a Decoupled AP1000 Reactor Core Control System Using Digital Proportional–integral–derivative (PID) Control Based on a Quasi-Diagonal Recurrent Neural Network (QDRNN)

Modeling and Load Follow Simulation of CPR1000 Nuclear Power Plant Implementing Mechanical Shim Control Strategy

Simulation and optimization of control rod sequence exchange operations for a pressurized water reactor under Mechanical Shim control strategy

Control of Small Pressurized Water Reactors under Single-Loop Operation Based on MFAPC Theory

Dynamic Response Analysis of Corrosion Products Activity under Steady State Operation and Mechanical Shim Based Power-Maneuvering Transients in AP-1000

IMPROVEMENTS ON CONTROL SYSTEM PERFORMANCE OF A SMALL PRESSURIZED WATER REACTOR

Control Strategy Study for Once-Through Direct Cycle Canadian SCWRs

A New Control Strategy and Compensation Method on Hybrid System of Combining Apf with Shunt Capacitors

A multiple-model based internal model control method for power control of small pressurized water reactors

Control of Canadian Once-Through Direct Cycle Supercritical Water-Cooled Reactors