Abstract:A transient, two-dimensional two-phase mass transport model is applied to investigate the cell dynamic operating behaviors of a liquid-feed direct methanol fuel cell (DMFC). The influences of various processes on the cell dynamics in response to sudden change of cell current density, methanol feed concentration, oxygen feed concentration, and the transient gas-slug blocking in the anode channel are studied. The results reveal that in response to the sudden drop of cell current density and methanol concentration, the cell voltage exhibits overshooting behavior as a result of the interaction between cathode and anode overpotentials with different time responses. The dominant factor causing the long response of cell voltages is the methanol rebalance in the membrane electrode assembly, which usually takes tens of seconds because of the sluggish methanol transport process. Also, it is indicated that in response to temporary blocking of anode diffusion layer surface with gas slug, the cell can still operate normally for a while because the anode diffusion layer serves as the fuel reservoir. It takes over a minute for the cell to break down in this case studied, implying that the cell output can be maintained stable if the gas bubbles or slugs in the anode channel can be removed quickly. However, too long residence time of gas slug in the channel definitely degrades the cell performance.

Transient Analysis of Passive Direct Methanol Fuel Cells with Different Operation and Design Parameters

Modeling of the Transport Phenomena in Passive Direct Methanol Fuel Cells Using a Two-Phase Anisotropic Model

Non-Isothermal Modeling of A Small Passive Direct Methanol Fuel Cell in Vertical Operation with Anode Natural Convection Effect

Characteristics of Heat and Mass Transport in a Passive Direct Methanol Fuel Cell Operated with Concentrated Methanol

Numerical simulation on mass transport in a passive vapor-fed direct methanol fuel cell operating with neat methanol

A transient two-phase mass transport model for liquid feed direct methanol fuel cells

Structural Design and Analysis of a Passive DMFC Supplied with Concentrated Methanol Solution

Effect of anode micro-porous layer on species crossover through the membrane of the liquid-feed direct methanol fuel cells

Operational and Structural Aspects of a Vapor-Feed Semi-Passive Direct Methanol Fuel Cell Supplied with Concentrated Methanol

Modeling of dynamic operating behaviors in a liquid-feed direct methanol fuel cell

Effect of Design and Operating Parameters on Dynamic Response of A Micro Direct Methanol Fuel Cell

Performance analysis and multi-optimization of direct methanol fuel cell based on a novel numerical model considering mass transfer

Modeling of a passive DMFC operating with neat methanol

Effect of the Cathode Gas Diffusion Layer on the Water Transport Behavior and the Performance of Passive Direct Methanol Fuel Cells Operating with Neat Methanol

Numerical Investigation of Cathode Water Management in Direct Methanol Fuel Cell with Micro-porous Layer

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst

Two-dimensional two-phase thermal model for passive direct methanol fuel cells

Two-phase Modeling of Mass Transfer Characteristics of a Direct Methanol Fuel Cell

Effects of Anode Microporous Layers Made of Carbon Powder and Nanotubes on Water Transport in Direct Methanol Fuel Cells

Passive direct methanol fuel cell using woven carbon fiber fabric as mass transfer control medium

Influence of Methanol Crossover on the Fuel Utilization of Passive Direct Methanol Fuel Cell