Abstract:Chromium (Cr)-containing electroplating sludge is a hazardous solid waste and has a detrimental effect on human health and the environment. The existing mainstream methods still have problems such as high costs and complicated processes. In this study, the composition, phase composition, heavy metal content, microstructure, calcination characteristics, and vitrification of chromium electroplating sludge were analyzed by XRF, XRD, ICP-OES, and SEM. The results showed that calcination of sludge at 650 °C and 850 °C produces magnetic ferrite ZnFe 2 O 4 . When solidifying sludge with D245 glass, the maximum sludge addition is 35% in order to make the Cr(VI) leaching concentration meet the national standard. Here, the plastic solidification method was developed to solidify Cr-containing electroplating sludge and fill plastic building templates. This method is simple to operate, low cost, and a promising prospect. The effect of surface modification of electroplating sludge was discussed. The most obvious effect of the modification is sodium stearate, modified by sodium stearate powder oil absorption decreases value from 0.62 g/1.0 g to 0.40 g/1.0 g. When sodium stearate with 1.5% was used as the sludge surface modifier, the contact angle reached 88.98°. Then, the effect of the ratio of PVC to modification sludge on the performance of PVC building templates was investigated and compared with that of the templates prepared by calcium carbonate filling. It was found that the performance of the sludge-filled PVC template was superior to the traditional calcium-carbonate filled PVC template when the ratio of PVC to sludge is 100:150, and the tensile strength reached 15.3233 Mpa and 13.745 Mpa, respectively. Thus, this study demonstrates a new method to treat and recycle Cr-containing electroplating sludge.

Structure Diversity and Reversible Anion Exchange Properties of Metal Complexes with Tripodal Ligand

Two Binuclear Molecular Magnets: K2Fe2(C2O4)Cl6(H2O)2and K6Fe6(C2O4)3Cl14(H2O)10

Assessment of thermal stability of chromium-rich electroplating sludge

Effects of Heat Treatments on Phase Structure of Electrodeposition Aluminum Coatings on Different Substrates

The chemical forms' change of heavy metals in the sewage sludge during acid-associated S/S process

Experimental and Theoretical Approaches for the Surface Interaction Between Copper and Activated Sludge Microorganisms at Molecular Scale

Structural studies of calcium silicate hydrate modified with heavy metal cations

The characteristics and resource utilization of chromium-containing electroplating sludge

Understanding and controlling the key phase transformation for selective extracting Ni and Cu from Cr-containing electroplating sludge

Simultaneous realization of heavy metal Cd solidification and chloride separation in municipal solid waste incineration fly ash: Mechanism and DFT analysis

Thermal Stability and Reductive Property of Cexzr1-Xo2 Solid Solution Doped Simultaneously by Fe, Mn or Fe, Cu

Complexation of Heavy Metal Cations on Clay Edges at Elevated Temperatures

Ag(I)-Coordinated Supramolecular Metallogels Based on Schiff Base Ligands: Structural Characterization and Reversible Thixotropic Property

Transformation Behavior of Heavy Metal During Co-thermal Treatment of Hazardous Waste Incineration Fly Ash and Slag/electroplating Sludge

Hydrothermal treatment coupled with pyrolysis and calcination for stabilization of electroplating sludge: Speciation transformation and environmental risk of heavy metals

Research of a Solidifying Agent Containing Miniral Slag to Consolidate Heavy Metals in Mineral and Municipal Wastes

POLYCRYSTALLINE STRUCTURE OF WASTE SLAG INALUMINUM FACTORY AT DIFFERENT CALCINING TEMPERATURES

Revealing Cation-Exchange-Induced Phase Transformations in Multielemental Chalcogenide Nanoparticles

Immobilization of Cu(II) and Zn(II) into Hydrocalumite - an X-ray Absorption Fine Structure (XAFS) Investigation

Synergistic immobilization of chromium in tannery sludge by ZnO and TiO2 and the oxidation mechanism of Cr(III) under alkaline in high temperature

Analysis Study on Residues of Incinerated Electroplating Sludge