Abstract:The presence of actuator faults and disturbances, coupled with the nonlinear characteristics inherent in batch processes, poses challenges to the design of high-precision control algorithms, especially for variables that vary over a large range. To solve this issue, we propose a two-step 2D constrained model predictive fault-tolerant control method that integrates the theory of min-max optimization. First, the original nonlinear batch process is approximated at different operating points and transformed into multiple polytopic systems (MPSs), which includes the "worst case" scenario, i.e., a case with all internal effects. Next, according to its characteristics and by introducing an output tracking error and batch state differences, an equivalent model of a MPS is created and an iterative learning control law was used. Based on this model, a quadratic performance index function, including anti-external disturbances, is designed, which is divided into two parts covering the entire infinite horizon. The linear state feedback control law plus the initial free control moves comprise the control law. In this way, the optimal control inputs are generated, and the system can be controlled with a greater margin, improving feasibility. Moreover, for closed-loop stability, a parameter-dependent Lyapunov function is constructed. An allowable range of actuator faults that the designed controller can resist is also considered and constructed. The advantage of the proposed control algorithm is that it fully considers the repetitive characteristics of batch processes, and for the first time, a 2D two-step control strategy related to time and batch directional information is designed, which greatly improves the system output tracking performance. Using a nonlinear batch reactor as an example, the method proposed in this study demonstrates its superiority tracking performance and ability to resist external disturbances than that of the traditional method.

GA Based Predictive Functional Control for Batch Processes under Actuator Faults

Predictive functional control for linear systems under partial actuator faults and application on an injection molding batch process

GA Based Fuzzy Neural Network Generalized Predictive Control Method

Fuzzy Adaptive Generalized Predictive Control for Wastewater Treatment Process

Dynamic Modeling And Nonlinear Predictive Control Based On Partitioned Model And Nonlinear Optimization

A Linear Quadratic Structure Based Predictive Functional Control Design for Industrial Processes Against Partial Actuator Failures

State Space Model Predictive Fault-Tolerant Control for Batch Processes with Partial Actuator Failure

Predictive Functional Control for Integrator Systems

Adaptive Online Neural Predictive Control of Hydraulic Actuator Using FPGA Acceleration

Predictive Function Control of Hydraulic Robot

Adaptive predictive functional control based on multiple-model

Predictive Functional Controller with A Similar Proportional Integral Optimal Regulator Structure: Comparison with Traditional Predictive Functional Controller and Application to Heavy Oil Coking Equipment

Genetic-Algorithm-Optimization-Based Infinite Horizon Linear Quadratic Control for Injection Molding Batch Processes with Uncertainty

Iterative Optimal Control for Batch Process Based on Generalized Predictive Control

Two-dimensional Optimization Design of Constrained Minmax Model Predictive Tolerant-Fault Control for Nonlinear Batch Processes

Iterative learning hybrid robust predictive fault-tolerant control for nonlinear batch processes with partial actuator faults

Design of State Space Linear Quadratic Tracking Control Using GA Optimization for Batch Processes with Partial Actuator Failure

Application of Two-Dimensional Predictive Functional Control in Injection Molding

Active Fault-Tolerant Control of Nonlinear Batch Processes with Sensor Faults

Iterative Learning Fault-Tolerant Control for Injection Molding Processes Against Actuator Faults

Robust predictive minmax fault‐tolerant control for multi‐phase batch processes under partial actuator faults and asynchronous switching